On the Erodibility of Rock and Other Earth Materials

Evaluation of Recent Field and Laboratory Research on Scour at Bridge Piers in Coarse Bed Materials

Designing Concrete Culverts to Resist Scour Damage

Best of Both Worlds
All around the Pacific Rim structural engineers are experimenting with concrete filled steel tubes as structural elements. The concrete filled tubes take advantage of the best properties...

Concrete Connections
A new application of polymer composites involves the repair and rehabilitation of reinforced concrete frame connections. Test results from a pilot study conducted at the California State...

Equalizing Wet Weather Flows
Sanitary sewer overflows and combined sewer overflows can wreak havoc on communities by flooding basements, contaminating drinking water sources and recreational water bodies, and flowing...

Wetlands Treat Mine Runoff
Engineers were asked to design a treatment system for the severely acidic drainage from the Mike Horse and Anaconda metals mines in Montana. Challenges included the mountainous terrain,...

Weighing Anchors
Modern anchorage systems offer design engineers and contractors unprecedented choice in load transfer mechanisms. Some anchors are highly specialized, while others are appropriate for...

Effect of Concrete Strength on the Behavior of RC Beams Subjected to Pure Torsion

Analysis of Joint Shear Failure of High-Strength Reinforced Concrete Interior Beam-to-Column Joint

Seismic Behavior of High-Strength Concrete Short Beams

Seismic Behavior of High Strength Concrete Filled Tube (CFT) Columns

Seismic Behavior of High-Strength Concrete Tied Columns

Behavior and Design of Confined High-Strength Concrete Columns

Failure Mechanism and Stress–Strain Idealization of Confined High Strength Concrete

Tests of High-Strength Concrete Precast Heads in Flat Plates

Seismic Behavior of Prestressed Concrete Beam-Column Joints

High Strength Concrete from Low Water Demand Cement

Crack Growth in Four Concretes Under Monotonic or Cyclic Splitting Load

Fundamental Aspects of Mechanical Behaviour of HS/HPC: The European Approach

 

 

 

 

Return to search