Temporal Development of Local Scour at Bridge Piers
The temporal development of local scour depth at circular cylindrical bridge piers is considered. New data are presented and used to quantify the influence of flow duration on the depth...
The Canadian Approach in the Design of Wood Structures: Conversion to Limit States Design
During the early 70's, the National Building Code of Canada (NBCC) established the principle that structural design be carried out using the limit states design (LSD) method. The technical...
Reliability of Light-Gage Metal Joist Hangers
Limit state design equations are formulated to assess the reliability of light-gage metal joist hangers using the results of experimental studies. The design equations are calibrated against...
Intermediate Support Cable Logging Systems
Cable systems for the transportation of fresh cut logs often employ existing trees as intermediate supports for the main support cable. Failure of these support trees is life threatening...
Use of Expert Systems in Selecting Equilibrium Isotherms of Organic Compound Adsorption on Activated Carbon
An outline of an Expert System (ES) that aids in selecting adsorption isotherms is presented. Such an ES provides an efficient technique for screening the present literature. The ES helps...
Finite Element Limit Load Analysis by the Static Approach Using Nonlinear Programming
The static approach to limit analysis using finite element modelling is formulated as a nonlinear programming problem and applied to the vertical cut problem. Whereas the kinematic approach...
Recovery of Chromium from Spent Plating Solutions by a Chromyl Chloride Process
A novel chromyl chloride process has been investigated for the recovery of hexavalent chromium from spent plating solutions. In this process chromium is converted to chromyl chloride by...
NCASI Experiment Related to Validation of Equilibrium Partitioning (EP) Theory
A review of NCASI's technical studies related to evaluating equilibrium partitioning (EP) theory as it is commonly applied in regulatory setting is presented. Although interim results...
Serviceability of Earth Retaining Structures
Civil Engineers increasingly face decisions concerning the serviceability of existing earth retaining structures. Serviceability limit states describe the functional disruption which occurs...
Study of Failures of Towers and Tall Buildings Under Wind Loading
In this paper, two kinds of wind-excited limit states on a tall structure are investigated and corresponding formulae for the limit wind pressures are presented. In solving the wind-excited...
Plastic Limit Analysis of Arch Dams
This paper applies the lower- and the Upper- bound theorems of the plasticity theory to arch dams, according to different forms of discretization for dam, two methods, namely the structural...
Legal and Regulatory Aspects to Support a Mexican Coastal Zone Management Program
In March 1992 the ecology sate agency was created in Baja California, it is in charge of selected aspects relating to protection of the environment and planning of the state's development....
Bayesian Reliability Updating of Existing Steel Girder Bridges
Bayesian statistics is used to update the reliability of existing composite steel girder bridges. A 60 ft. long simply supported superstructure is considered. The reliability for the ultimate...
On the Diffusional Stress Transmission
A probabilistic diffusional mechanism for the propagation of intergranular forces has been formulated as a set of three mathematical assumptions. The equilibrium equations are complemented...
Erosion of Steep River Banks and Time Evolution Towards Equilibrium Channel Shape
A numerical analysis of the time evolution of straight river channels is presented. The bed and bank, material is taken to be coarse, non-cohesive and uniform in size. As a result of the...
An Advanced First-Order Method for System Reliability
This paper proposes an iterative first-order method for accurate estimation of the joint failure region of two nonlinear limit states. Current methods use either a first-order approach...
Probabilistic Rotordynamics Analysis Using an Adaptive Importance Sampling Method
A methodology is developed to compute the probability of instability of a rotor system that can be represented by a system of second-order ordindary linear differential equations. The...
Structural System Design under Uncertainty Via Pareto Optimization
Structural systems are generally designed under safety, serviceability and economy requirements. The single objective optimal design problem of both deterministic and nondeterministic...
A Competitive Framework for Evaluating the Economic Benefits of Port Improvements
This paper presents an economic model for analyzing the benefits and optimal timing of port capacity increases. The model is presented through a case study of the Port of Ningbo, along...
Compilation/Validation of Thermodynamic Data for Plutonium for Nuclear Waste Disposal: 1. Preliminary Results
A provisional thermodynamic database for plutonium has been compiled from a review of available data and other critical compilations. The database was compared to tabulations of Gibbs...
Return to search