A Study of Stress Distribution in Geogrid-Reinforced Sand

Design Conditions and Analysis Methods for Soil-Cement Buttresses in Fort Point Channel

Shake, Rattle and Hold (Available in Structural Engineering Special Issue Only)
In-situ lateral load tests of two bridge bents were conducted on Interstate 15 in Salt Lake City, Utah, to determine the strength and ductility of an existing concrete bridge and the improvements...

Bottom Shear Stress from Propeller Jets

Changes of Mean Velocity Profiles in a GLM Formulation

River Bed Deformation Computed from Shear Stress

Improvement of Flow and Bed Profile Due to Gentler Bank Slopes in a Curved Channel

Bedload Transport in Cobble-Bed Rivers

Resistance to Flow at the Channel-Overbank Interface

Bed Shear Stress in Sine-Generated Channels

Two-Dimensional Bank Erosion Model for Noncohesive Bank Material

Subsurface Flow and Channel Erosion

Measurement of Gmax Under Anisotropic Loading Condition Using Bender Elements

In Situ Low Strain Shear Modulus Profiles for Three Soil Deposits

Formulation of Undrained Behavior of Saturated Sands from Drained Rebounded Response

Horizontal Residual Post-Liquefaction Deformation of Level Ground

Validation of Site Characterization Method for the Study of Dynamic Pore Pressure Response

Cyclic Lateral Loading of Model Pile Groups in Clay Soils

Repair of Liquefaction Induced Lateral Spreading and Settlement Using Compaction Grouting

An Effective Stress Model for Pedicting Liquefaction Behaviour of Sand

 

 

 

 

Return to search