Desktop Publishing an O&M Manual
With word processing programs and high quality laser printers, it's easier than ever to create professional looking documents. The term desktop publishing refers to the production...
Probing Pipelines (available only in Geoenvironmental Special Issue)
Inspecting underground pipelines has become easier, more effective and less intrusive through use of sonar, radar, lasers and seismic and acoustic testing. To replace simple visual inspection,...
Thermal Response in Antenna Under Laser Irradiation
This investigation focuses on the thermal response of two objects under medium-intensity continuous-wave (CW) laser irradiation: (1) a homogeneous slab and (2) a complex electronic component,...
Gravitational Wave Astronomy and the Lunar Ligo Concept
The preliminary proposal (LaFave and Wilson, 1993, 1992) for emplacing a modest LIGO [ Laser interferometer Gravitational Wave Observatory ] system on the Moon using unmanned robotic landers...
Laser Generation and Detection of Ultrasound in Concrete
Laser ultrasonics is a non-contact nondestructive evaluation method that uses lasers to generate and detect elastic waves. In this work, laser ultrasonics is used to produce broadband...
Estimating Laboratory Wave Reflection Using Laser Doppler
Estimates of irregular wave reflection in two-dimensional laboratory wave tanks are typically accomplished using an array of spatially separated wave gauges. This paper presents a frequency...
Measurement of Turbulent Properties in a Natural System
Instruments designed to measure flow properties in stratified estuaries, lakes and oceans are reviewed. Emphasis is given to the measurement of turbulent fluxes and recent developments...
An Investigation of Turbulence in Open Channel Flow via Three-component Laser Doppler Anemometry
A three-component laser Doppler anemometer is used to reexamine the distribution of single-point mean statistics in a nearly uniform fully-developed 2D turbulent open channel flow of water...
Response of Velocity and Turbulence to Abrupt Changes from Smooth to Rough Beds in Open-channel Flows
Response of velocity distribution and turbulence characteristics to abrupt changes of bed roughness have been investigated experimentally with two-component laser Doppler anemometer (LDA)....
Optical Methods for Sediment-Laden Flows
A method of distinguishing between the signals from the liquid-seed particles and sediment particles, while using LDV in sediment-laden flows, is described. The validity of the method...
LDV System for Towing Tank Applications
The design, construction, testing, and operation of a two-dimensional LDV system for use in a towing tank is described. The primary design considerations were underwater application, minimal...
Non-Intrusive Experimental Setup for Inflatable Dam Models
A method which allows for a non-intrusive evaluation of the dynamic response of the inflatable dams under overflow and impounding water conditions is presented. The internal pressure variations...
An Experimental Study of Bivalve Siphonal Jets in a Turbulent Boundary Layer Crossflow
We conducted experiments in a laboratory flume to study the interaction of bivalve siphonal jets with the turbulent boundary layer which forms in the benthic region of shallow estuaries....
Laboratory Study of the Characteristics of Shallow Open Channel Flow Using Fiber-optic Laser Doppler Velocimetry
An experimental study was proposed to investigate the characteristics of shallow rain-impacted flow using a recirculating flume and an artificial rainfall simulator. The fibre-optic Laser...
Computer Vision Techniques for Comparing Laser Doppler Velocimeter Scans of a Vibrating Plate to Analytical Plate Modes
Computer vision procedures were applied to velocity images of a vibrating square steel plate. A scanning laser Doppler velocimeter (LDV) measured the images of low frequency resonant operating...
Laser Interferometric Characterization of Acoustic Emission Transducers
The characterization of the exact response of commercially available, piezoelectric and thin film, acoustic emission transducers is of fundamental importance for the nondestructive evaluation...
Use of Laser Holography and Image Analysis for Crack Measurement and Determination of Strain Fields in Cement Based Materials
The authors have successfully used laser holographic interferometry to measure various parameters, such as crack size, crack spacing, crack opening displacement, surface displacements...
3-D Positioning for Construction Surveying and Automation
Three-dimensional real-time positioning is a critical requirement to allow for improved surveying and autonomous vehicle control. Given such a system and a project data link, multiple...
Formation of Droplets from Bursting Bubbles at an Air-Water Interface
The breakup of an air bubble at a still water surface leads to the formation of two distinct droplet families known respectively as film drops and jet drops. The former are the tiny fragments...
Displacement Measurement by Laser Interferometry and Image Analysis
Laser holographic interferometry was used for the evaluation of displacement fields on concrete and fiber reinforced concrete specimens. Transmission holography was used to analyze mortar...
Return to search