Calculation of Turbulent Flow in Open Channel Bends
How Spacing of Cross-Section Surveys Affects Understanding of Variability in Channel Hydraulic Geometry
An Approach to Optimal Well Design
A Study on Top Sealing Slit of Reversed Tainter Valves and Its Application
Evaluation of the Newton Secant Method in Hydraulic Design Applications
Study on Effective Parameters on Vortex Formation at Horizontal Intake
Calculation of Subsurface Stormflow in Heterogeneous Sloping Aquifers
Application of the Simulation-Optimization Approach to Groundwater Management: Pease Air Force Base Case Study
Coordination
Water Resources and Environment
This proceedings,
Water Resources and the Urban Environment
This proceedings,
Hydraulic Behaviour of Geosynthetics in Freezing Conditions
Modeling Ice-Covered Rivers Using HEC-RAS
Design of River Crossings for the Trans-Alaska Fiber Optic Cable: Case History
Ice-Cover Thickening at River?Reservoir Confluences: A Case Study
Freeze-Thaw Effects on a 10% Sand-Bentonite Mixture
Experimentally Determined Freeze-Thaw Effects on the Hydraulic Conductivity of Geosynthetic Clay Liners
Detecting Cracks by Image Analysis on a Parallel Computer
Effectiveness of Landslide-Control Measures: A Numerical Approach
Geotechnical Performance of a Highway Embankment Constructed Using Waste Foundry Sand
A highway embankment was constructed near Auburn, Indiana, using waste foundry sand (WFS) as a demonstration project for the Indiana Department of Transportation (INDOT). Laboratory testing...
Using Waste Foundry Sand for Hydraulic Barriers
Green sand is a mixture of uniformly graded fine silica sand, bentonite, and organic binders that is used to make molds for castings in gray-iron foundries. Large quantities of waste green...
Return to search