Photogrammetry for Rock Engineering: A Snapshot of State-of-the-Art Rock Mapping
Generally speaking, photogrammetry is the science of turning photographs into 3D models. While flashy advertisements may convey the idea that it's as simple as pushing a button (e.g., on a drone remote)...

Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...

A Preliminary Case for the Existence of Hurricane Alleys in the Gulf of Mexico
A review of hurricance intensity in the Gulf of Mexico suggests there are two alleys where hurricanes are roughly 20% more intense than elsewhere. This paper develops a physical basis for the alleys using...

Testing the New Locks (part of "A Greater Wonder")
The recently completed third set of locks at the Panama Canal incorporates several civil components and hydraulic design features that are intended to reduce routine maintenance and conserve water. For...

ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering
he ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering will serve as a medium for dissemination of research findings, best practices and concerns, and for discussion...

Post-Earthquake Reconnaissance Using Digital Imagery: A Bird's-Eye View
Over the last decade, remote sensing has played an increasing role in geotechnical earthquake reconnaissance through the use of satellite imagery, LIDAR, and unmanned aerial vehicles (UAVs). These techniques...

Making Big Data Work for You and Your Project: A 3-D Geotechnical Model is a Smart Way to Work
Modeling the stratigraphy beneath a site and assigning soil and rock properties are important steps in geotechnical engineering. Geotechnical engineers often need to model ground conditions...

BIM in Geotechnics: The Benefits of Including Geotechnical Data in Building Information Modelling
Building Information Modelling (BIM) is becoming increasingly common around the world on building and civil engineering projects, but what are the benefits to geotechnical engineers and...

Hydrologic and Hydraulic Design Methods
Computational methods for hydrologic analysis, hydraulic functions, and treatment capacity of permeable pavements vary depending on the complexity of the design and level of detail in...

Geo-Congress 2014
Technical Papers and Keynote Lectures
Proceedings of the 2014 Geo-Congress, held in Atlanta, Georgia, February 23-26, 2014. Sponsored by the Geo-Institute of ASCE. GSP 234, Geo-Congress...

Estimation of Consolidation Properties of Clay from Field Observations
Analyses to obtain theoretical time-settlement curves for embankments typically make use of soil properties measured in the laboratory on small disturbed samples subject to strain rates...

Measurement of Hydraulic Conductivity of Partially Saturated Soils
Increased interest in protection of the environment has led to a need to be able to predict long-term movement of moisture, and contaminants, in the vicinity of shallow land disposal sites...

Performance of Suction Caissons in Sand and Clay
The use of suction caissons (suction piles) in marine environments has been increasing in the last decade. A suction caisson is a steel pipe with an open bottom and a closed top that is...

Shear and Interface Strength of Clay at Very Low Effective Stress
Thin-specimen direct shear (TSDS) tests were conducted to measure the shearing strength of kaolinite, and interface strengths between kaolinite and acrylic plastic and anodized aluminum,...

Hybrid Modelling of Seismic Structure Interaction

A Fault-Rupture Propagation Model for Ground Motion Simulation

Mathematical Modelling of Intermediate Trusses

Numerical Modeling Applications in Offshore Petroleum Developments

Hydrologic Modeling in 2050: Knowledge Requirements in a Multi-Nonstationary Environment

Reflections from a Water Resources Modeler and Planner in 2050

 

 

 

 

Return to search