Structures Congress 2007
The Congress' technical program was designed with the practicing structural engineer in mind while maintaining a rigorous standard for the academic presentations. Topics include:...
Channel Stability Assessment for Flood Control Projects
This manual provides assistance for determining potential channel instability and sedimentation effects in flood control projects. It is intended to facilitate consideration of the type...
Application of High-Resolution Schemes to Free Surface Flows in Irregular Channels
A 1-D flow model employing a high resolution scheme based on the Total Variation Diminishing concept is applied to non-prismatic channels of irregular cross-section. The hydraulic properties...
Simulation of Regional Ground-Water Flow on a Transboundary Flowline; Trans-Pecos, Texas and Chihuahua, Mexico
A two-dimensional, steady-state, cross-sectional model was used to evaluate boundary conditions, residence times, and potential transboundary movement along a 28 mi (45 km) flowline between...
Optimal Sizing of Width- and Depth-Constrained Trapezoidal Channels
Open-channels are often designed based on the assumption of uniform flow and normal depth. If a channel is to be lined with a nonerodible material, the dimensions of the channel can be...
Seismic Design of RC Structural Walls with Unsymmetrical Cross-Sections
An overview of seismic design issues and current experimental research for walls with unsymmetrical cross-sections is presented. The experimental studies include approximately 1/4 and...
The Use of Built-Up Compression Members?A Fabricator's Viewpoint
A variety of cross-sections of built-up compression members that have been used are shown. Suggested items that need to be addressed for the successful design and fabrication are discussed....
Water Surface Profile Computations?How Many Sections do I Need?
One-dimensional streamflow models, including standard-step models, require a sufficient number of cross sections to satisfy two needs. First, a sufficient number of cross sections must...
A Study of Lateral Bed Slopes Developed at Bend
A study was conducted to compare seven actual cross section profiles of Philip Bayou Realignment with the lateral bed slopes estimated from the model derived by Ikeda titled `Sediment...
Bridge-Scour Analysis Using the
A program was developed to extract hydraulic information required for bridge-scour computations, from the Water-Surface Profile computation model (WSPRO). The program is written in compiled...
The Definition of a Short Composite Column
A `short' column in composite construction is defined as one which can be designed for its cross-section strength alone without the need to consider stability effects. An extensive study...
Inflatable Structures of Non-Circular Cross Section
This paper discusses six approaches to achieve an inflatable structure of non-circular cross section for use in lunar base development. Other papers have examined potential multiple uses...
The Pittsburgh MAGLEV Project
A passenger transportation crisis exists in the United States which experts predict will only worsen, wasting billions of U.S. dollars. Magnetic Levitation (MAGLEV) is a promising new...
Buckling of Variable Cross-Section Columns
An approximate solution for the problem of buckling of variable cross-section columns, loaded by variable axial force is given, for several boundary conditions. Both the cross-section...
Hysteresis Studies Including Post Buckling of Angle Web-Members for Truss-Type Girders
The paper presents analytical studies of the buckling capacities and hysteresis behavior of angle-web members of truss-type girders. The eccentricity between the loading point and the...
Stereolithography
Stereolithography is a three-dimensional printing process which produces accurate copies of CAD solid or surface models directly from CAD data. The process uses a moving laser beam, directed...
Estimating Velocity and Scour in River Bends
A one-dimensional, steady-state, stream tube model was used to simulate hydraulic characteristics at a cross section. This enabled computation of higher velocities on the outside and lower...
The Effects of Bank Protection on River Morphology
Revetment of bends with radius of curvature to width ratios (R/W) between 1.9 and 3.3 on Red River AR, and Sacramento River CA, does not cause the expected thalweg deepening and channel...
Computerized Bridge Coding for HEC-2 Applications on I.B.M. P.C.
A computer program for conversion of survey field notes directly into SB, BT, and GR cards with simultaneous cross-section plot is described. It was designed to simplify the coding of...
Optimization: An Emerging Technology
The technology of formal, numerical structural optimization is neither mysterious nor complex. Software programs are now available for use by engineers who do not have detailed knowledge...
Return to search