Material Difference
It was only fitting that the design of a center dedicated to the visual arts on the campus of Franklin & Marshall College feature an interplay of materials — from glass and concrete to steel and...

Simulating Radionuclide Transport Away from an Underground Nuclear Test: Linking Non-Isothermal Flow and Mechanistic Reactive Transport
The low-yield (0.75 kiloton) Cambric underground nuclear test situated in alluvium below the water table offers unique perspectives on radionuclide transport in groundwater. The Cambric...

Size and Scale Effects on the Shear Strength of Concrete Beams
This paper identifies and discusses the role of proper geometric scale of relevant parameters in the size effect in shear, particularly in terms of practical beam design. In the overall...

Innovative Methods Used in the Design and Construction of the New Tacoma Narrows Bridge
On September 25, 2002, Notice-to-Proceed for a Design/Build Agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC)...

Non-Destructive Strength Evaluation of a Continuous, Reinforced Concrete Slab Bridge
In the state of New Mexico, a significant number of reinforced concrete slab (RCS) bridges provide service on interstate highways I-10, I-25, and I-40 that are subjected to large amounts...

Toward a Unified Approach to Anchorage in Reinforced Concrete Design
The introduction of rationalized design procedures for cast-in and post-installed anchors inEurope and the U.S. was intended to provide a uniform factor of safety for anchorages inconcrete,...

Reinforced Concrete Beam: Introduction
This chapter introduces the subject of reinforced concrete beams....

Reinforced Concrete Beam
This chapter discusses the tabulation of reinforced concrete beams data in Microsoft Excel....

Reinforced Concrete Beam
This chapter discusses the tabulation of reinforced concrete beam data in Microsoft Excel....

Evaluation of the VERSA-LOK / Miragrid Reinforced Soil Wall System
Final Report
Prepared by the Highway Innovative Technology Evaluaton Center (HITEC), a service center of Civil Engineering Research Foundation. This evaluation...

On the Inelastic Design of Steel I Girder Bridges
This paper documents the development of a relatively easy to use set of effective plastic moment expressions and compares the performance of these equations with a series of experimental...

The New Tacoma Narrows Suspension Bridge Introductory Project Information
On September 25, 2002, Notice-to-Proceed for a design-build agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC),...

Zemmouri, Algeria, Mw 6.8 Earthquake of May 31, 2003
Prepared by the Earthquake Investigations Committee of the Technical Council of Lifeline Earthquake Engineering ASCE. This TCLEE Monograph summarizes...

Torsion of Reinforced Concrete -A Historical Overview
The story of torsion of reinforced concrete must start with the French professor, C. L. Navier. In his landmark book (Navier, 1826) he rigorously derived the first rational theory for...

Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...

Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...

Members Subjected to Torsion Combined with Other Actions
The combination of torsion with bending and shear (T-M-V) in members with both transverse and longitudinal reinforcement is the most commonly encountered combination in practical cases....

Detailing and Design Examples for Torsional Members
The nature of the internal force flow in a concrete member subject to torsion brings about both longitudinal and transverse force components. The resulting tension brought about by the...

Evaluation of the CON-ARCH reinforced Concrete Buried Arch System
Final Report
This report summarizes the evaluation of the Con-Arch culvert system marketed by Hunter Contracting, Co. of Tucson, Arizona. The evaluation consisted of computer analysis and field testing of two Con-Arch...

Nonlocal Integral Formulations of Plasticity and Damage: Survey of Progress
Modeling of the evolution of distributed damage such as microcracking, void formation, and softening frictional slip necessitates strain-softening constitutive models. The nonlocal continuum...

 

 

 

 

Return to search