Mini-Pile Case Histories and a Tensile Load Test on an Instrumented Mini-Pile
Reducing Settlement Risks in Residual Piedmont Soils Using Rammed Aggregate Pier Elements
Limit Analysis of Reinforced Foundation Soils
Modeling of Inelastic Behavior of RC Structures under Seismic Loads
Proceedings of the U.S.–Japan Seminar on Post-Peak Behavior of Reinforced Concrete Structures Subjected to Seismic Loads: Recent Advances and Challenges on Analysis and Design, held in...
Seismic Design of Highway Bridges: Recommended Specifications
Under the AASHTO-sponsored National Cooperative Highway Research Program (NCHRP), a joint venture of the Applied Technology Council and the Multidisciplinary Center for Earthquake Engineering...
A Framework for Performance-Based Seismic Design
The following probabilistic framework for seismic performance assessment is presented as an effective foundation for the development of performance-based guidelines. It suggests a generic...
Update of Serviceability Design Considerations for Low-Rise Steel Buildings
In 1990, the American Institute of Steel Construction published Servicability Design Considerations for Low-Rise Buildings by James M. Fisher and Michael A. West. This document was published...
Seismic Analysis and Retrofit of the Amoskeag Bridges
In 1983 AASHTO first offered the design guide for seismic analysis of bridges, which ultimately became a permanent part of the AASHTO Bridge Design Manual in 1990. Prior to this time,...
Evolution of Composite Floor Systems in the United States
Composite floor systems, which combine structural steel beams with a cast-in-place concrete slab, have grown in popularity in the U.S. during the past 40 years. In most early applications,...
Development and Validation of Mechanistic Coefficients for Flexible Pavement Structures Designed by AASHTO Guide
Foundations and Ground Improvement
This proceedings,
Evaluation Findings for Seismic Energy Products, L.P. Elastromeric Isolation Bearing
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report presents the results of a detailed evaluation...
Evaluation of Thermocoax Piezoelectric Weight-in-Motion Sensors
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report describes a program of installation,...
Evaluation of Measurement Specialties, Inc. Piezoelectric Weigh-In-Motion Sensors
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report describes a program of installation,...
Design Considerations for the North Railroad Alluvial Fan Levee System in Boulder City, Nevada
This paper presents a drainage study for a flood control levee system in Boulder City, Nevada. This levee system is located below an alluvial fan watershed and was proposed to protect...
Finite Element Analysis of Reinforced Concrete in Bridge Seismic Design Practice
Centrifugal Modeling and Numerical Analysis of the Improvement of Soft Clay under Embankment
Foundations in Weathering Profiles from Igneous and Metamorphic Rocks
Foundations in Carbonate Rocks and Karst
Assessing Foundation Damage in Karst Using Electrical Resistivity Tests
Return to search