From Good to Great: The Evolution of Cutoff Wall Quality Control and Verification Techniques
The last three decades have brought tremendous improvements to quality control (QC) procedures for construction and post-construction verification of deep cutoff walls installed in active high-hazard dams....

A Brief History of Jet Grouting in the Last 50 Years: The Story of Its Evolution
Jet grouting, a grouting soil improvement construction technique, was first developed in Japan in the 1960s and 1970s, and then introduced in Europe a few years later in the form of a proposal for soil...

Design of Submarine Pipelines Against Upheaval Buckling
This paper describes part of a comprehensive joint-industry project on upheaval buckling. It develops a semi-empirical simplified design method and detailed design methods based on a new numerical analysis,...

ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering
he ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering will serve as a medium for dissemination of research findings, best practices and concerns, and for discussion...

Cost Considerations
Cost is an important consideration when comparing microtunneling with other construction methods. Direct costs should not be the only consideration. Microtunneling has other benefits that...

Becoming Greener with Green Sand: An Iron Castings Company Devises an Environmentally Friendly Liner System Reusing Foundry Byproduct
Metalcasting is one of the oldest methods of recycling—humans have a few millennia worth of experience with the technique—but today's industry still battles public preconceptions...

Risk-based Methods for Geotechnical Features in Transportation Asset Management
The purpose of asset management is to meet life cycle performance goals through the management of assets in the most cost-effective manner. In developing risk-based, asset management plans...

The Future of Underground Construction Monitoring
In the past 15 years, the tools and techniques used to monitor the performance of existing ground and surrounding structures during construction have improved significantly. Practice is...

Karst-Related Sinkholes: Dynamic Compaction as an Effective Remediation Option
The paramount issue to address before constructing at sites underlain by karst topography is identification and remediation of sinkholes which exist close to the surface, and specifically...

Interactive Graphics Dynamic Analysis of Frames

Hybrid Modelling of Seismic Structure Interaction

Engineering Approximations for the Dynamic Behavior of Deeply Embedded Foundations

Finite Element Analysis of Complex, Welded Tubular Joints

Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE 5-11), and Specification for Masonry Structures TMS 402-11/ACI 530-11/ASCE 6-11), and Companion Commentaries
Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Six
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Introduction
This chapter serves as an introduction to the book. The application and scope of its recommendations for hybrid coupled wall systems are discussed....

Alternative Hybrid Wall Systems
This chapter discusses alternative hybrid wall systems. Topics include unbonded post-tensioned coupled wall systems; steel coupling beam with fuse; and composite shear plate coupling beam....

Innovative Methods Used in the Design and Construction of the New Tacoma Narrows Bridge
On September 25, 2002, Notice-to-Proceed for a Design/Build Agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC)...

Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-08/ACI 530-08/ASCE 5-08, Specification for Masonry Structures (TMS 602-08/ACI 530.1-08/ASCE 6-08) and Companion Committees
The Code covers the design and construction of masonry structrures while the Specification is concerned with the minimum construction requirements for masonry in structures. Some of the...

Technology Based Hybrid Classes for Multiple Applications
The academic demands on a typical professor mean that his or her time must be used to maximum advantage. There is advising of students, research, teaching, grading, class preparation,...

 

 

 

 

Return to search