ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
The journal will meet the needs of the researchers and engineers to address risk, disaster and failure-related challenges due to many sources and types of uncertainty in planning, design, analysis, construction,...

Design and Installation of Auger Steel Catenary Risers
The Auger export pipelines are connected to the TLP by steel catenary risers (SCRs). This is believed to be the first time steel pipe has been used for catenary risers. SCRs offer advantages...

Detection of Fatigue Cracks in Structural Members

Rider-Soil Interaction and Fatigue: Recent Advances in the State of the Art

The Development of Allowable Fatigue Stresses in API RP2A

Closed-Form Expressions for Determining the Fatigue Damage of Structures Due to Ocean Waves

Fatigue Reliability in Welded Joints of Offshore Structures

Probabilistic Fatigue Analysis of Fixed Offshore Structures

Reliability-Based Service Life Prediction and Durability in Structural Safety Assessment

Life-Cycle Environmental Accounting and Decision-Making for Bridge Structures
This presentation focuses on life-cycle environmental accounting and decision-making for bridge structures using the example of steel and steel-reinforced concrete....

Replacing a Dying Water Infrastructure
The water infrastructure in the United States will soon need massive repairs. Pipes are leaking, and most pipes are near the end of their life cycles. Tens of thousands of sewer overflows...

Predicted Service Life of Armor Stone: A Case History
Laboratory testing for determination of true rock quality in terms of expected performance is not clear-cut, may be misleading, and requires extensive interpretation by an expert. This...

Bell's Bridge Rehabilitation
Bell's Bridge carries Tidewater Drive, a major urban arterial in the City of Norfolk, Virginia, over Wayne Creek, a tributary of the Lafayette River. During a routine inspection in 1995,...

Maintenance of Diaphragm-Girder Connections
Fatigue cracking at diaphragm-girder connections and at similar connections of cross-frames and floorbeams have been common in steel highway bridges for the past 20 or 30 years. Fatigue...

Evaluation Findings for R.J. Watson Sliding Isolation Bearings
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailed evaluation...

Crack Growth in Four Concretes Under Monotonic or Cyclic Splitting Load

Life-Cycle Optimization of Structures with Seismic Energy-Dissipating Devices

Fracture and Fatigue Behavior of Steel Structures: The Importance of Details

Life-Cycle Cost Design of Deteriorating Bridges Using Genetic Algorithm

Lifetime Reliability of Concrete Bridges

 

 

 

 

Return to search