Performance Limits for Deepwater Pipelines
This paper highlights the differences between onshore and offshore pipeline design. It then summarizes the results of combined external pressure, tension, and bending testing on full scale...

Extreme Wave-Force Calculation Procedure for 20th Edition of API RP-2A
The paper describes the revised guideline design wave force calculation procedure approved for the 20th edition of the API-RP2A WSD and the first edition of the API-RP2A LRFD and contrasts...

A Simple Model to Predict Soil Resistance to Driving for Long Piles in Deepwater Normally Consolidated Clays
As the exploration and development for offshore oil and gas reserves moves into the deepwater environment of the continental slope, a good model is necessary to evaluate drivability of...

Failure of a Twenty-Foot High Retaining Wall
A cantilever retaining wall, designed in apparent accord with provisions in a civil engineering handbook, failed soon after construction. Analyses of the causes of the failure are presented....

Axial Capacity of Steel Pipe Piles in Clay
Development of theories for the prediction of the axial compressive and tensile load capacities of driven piles is made difficult by a variety of factors, e.g., disturbance of the soil...

Application of Model Pile Tests to Axial Pile Design
Experiments conducted with instrumented model pile segment probes at Harvey and Empire, Louisiana are summarized and the observed behavior interpreted. Correlations are developed for the...

Advanced Fracture Control Procedures for Deepwater Platforms and Compliant Towers
This paper describes an integrated approach to fracture control problems – applied first as a necessary adjunct to the authors' own engineering practice, then in developing...

Case Study of Offshore Pile System Reliability
This paper presents the results of research effort to evaluate the reliability of offshore pile foundation systems. It is an extension of previous work by the authors [14] dealing with...

Offshore Platform Steel Specification
The discovery in the 1980's of local brittle zones (LBZ's) in and near the heat-affected zone (HAZ) of the fabrication welds in certain offshore platform steels...

Geo-Shanghai 2014
Proceedings of the Geo-Shanghai 2014 International Conference, held in Shanghai, China, May 26-28, 2014. Sponsored by the Geo-Institute of ASCE. These...

Reliability and Resilience — Essential Ingredients of Sustainable Geotechnics
Sustainability of a system is its ability to survive and retain its functionality over time. In very simple terms, sustainability deals with the capacities (resistances) and demands (loads)...

Asset Management of Earth Retaining Structures: Design through Design Life
Regarding new earth retaining structures (ERS) construction, the message is clear: plan for asset management. New construction is certainly not immune to performance issues, and the time...

Development and Use of Force Pulse Train Generators

High Explosive Simulation of Earthquake-Like Ground Motions

Hybrid Modelling of Seismic Structure Interaction

A Fault-Rupture Propagation Model for Ground Motion Simulation

Measurements of On-Site Dynamic Parameters for Seismic Evaluations

Calculated Examples of Long-Span Bridge Response to Wind

Wind Loading and Response of a High-Rise Building

Dynamic Interaction of Liquid Storage Tanks and Foundation Soil

 

 

 

 

Return to search