Crossing the Forth
Scotland’s Queensferry Crossing spans the Firth of Forth, connecting Edinburgh and the Kingdom of Fife. Built at a cost of $1.89 billion in six and a half years, the 1.6 mi long cable-stayed bridge, with...

Rapid Recovery
In May 2017, the California Department of Transportation had to contend with a massive landslide that closed a section of the iconic State Route 1 through central California’s scenic coastal region of...

Tied Together
The replacement of the John Greenleaf Whittier Memorial Bridge was one of the signature projects of the Massachusetts Department of Transportation's $3-billion accelerated bridge construction program....

Training for Disaster
The structural complexes used to train first responders must accommodate a wide range of theoretical and practical learning. From classroom spaces to built-to-burn assemblies to buildings within buildings,...

Design Details (part of "Uplifted")
In all projects, the interconnectivity of each component is important. A movable bridge is an especially complicated structure that is exposed to an array of dynamic movements and transient loading conditions...

Permanent Sensors Turn Construction Project into Long-term Research Study (part of "Room To Grow")
The Centre for Smart Infrastructure and Construction (CSIC) at Cambridge University, in conjunction with Arup, has placed fibre-optic cables that will serve as permanent sensors on the underground structure...

A Different Angle (part of "West Side Extraordinary")
The unique, sloping shape of the VIA 57 West building is formed from cast-in-place concrete from the single, partial basement level up to the structure's 34th floor; braced galvanized steel framing completes...

NTSB Issues Preliminary Report on Florida Bridge Collapse (part of Infrastructure Solutions: Bridges Move Forward)
In late May, the National Transportation Safety Board (NTSB) released its preliminary report about the March 15 structural failure and collapose of a partially-constructed pedestrian bridge in Miami....

Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...

Heave Compensated Landing System - A Novel Tool for Subsea Intervention
This paper presents a new intervention system that allows the use of a low cost workboat to deploy and recover delicate payloads in subsea installations. Vessel motions are decoupled from the subsea package...

Seismic Data from Smartphones: MyShake: Building a Global Smartphone Seismic Network
Increasing the density of earthquake-monitoring instruments at a fast rate and at a low cost is a dream for many researchers who study earthquakes. MyShake, a smartphone application developed by the Berkeley...

Rock Glue Gets the Job Done: Reducing Rockfall Hazards along the G.W. Parkway
After a large rockfall damaged the road and disrupted traffic along the George Washington Memorial Parkway in 2002, the National Park Service was looking for solutions to stabilize the slope against additional...

Nature Sides with the Hidden Flaw: Lessons Learned from Failures of Earth-Support Systems
In recent years, the demand for excavations and fills of significant height has increased due to many factors, including requirements for below-grade parking for urban buildings and the need to construct...

Emergency Retaining Wall Replacement: The East 26th Street Slide Repair in Baltimore, MD
During a record rainfall on April 30, 2014, a century-old, stone retaining wall between a dense urban roadway (26th Street) and the CSXT railroad track in Baltimore, MD, failed. The stone retaining wall...

Highway Retaining Walls are Assets: A Risk-Based Approach for Managing Them
Throughout history, retaining walls (RWs) have served a vital role in supporting civil infrastructure. The ruins of dry stone walls that purportedly supported the hills and slopes of ancient Rome can be...

Optimized Drilled Shaft Design through Post-Grouting: Shorten That Shaft for Better Performance
Tip post-grouting is a technique used to inject, under pressure, a neat cement grout beneath the base of a drilled shaft. This method enhances or improves axial load-displacement performance by increasing...

Geotechnical Aspects of Pavements: There's More to Roads than Asphalt and Concrete!
When you jump on the highway to make that commute to work, do you think much about what's under the surface you ride on? Pavements are layered systems designed to provide a strong structure to support...

Performance-Based Earthquake Engineering: What Can It Do for You?
There's been a lot of talk, and some confusion, lately about performance-based earthquake engineering (PBEE). Many geotechnical engineers wonder -- what is it, how does it differ from what I've been doing,...

Post-Earthquake Reconnaissance Using Digital Imagery: A Bird's-Eye View
Over the last decade, remote sensing has played an increasing role in geotechnical earthquake reconnaissance through the use of satellite imagery, LIDAR, and unmanned aerial vehicles (UAVs). These techniques...

The 2010-2011 Canterbury, New Zealand, Earthquake Sequence: Impetus for Rethinking the Way We Evaluate and Mitigate Liquefaction
Liquefaction is a common cause of ground failure during earthquakes and is directly responsible for tremendous damage to infrastructure. Evidence of the impact of liquefaction includes failure of bridge...

 

 

 

 

Return to search