Safety Concepts and Risk Management
Roles of Regulations and Standards
Load Modeling
Reliability-Based Design
Soils and Foundations
Assessment of Existing Structures
Human Error in Constructed Projects
Quality Management of Structural Design
Side Resistance in Piles and Drilled Shafts (The Thirty-Fourth Karl Terzaghi Lecture)
Analysis of Dynamic Laterally Loaded Pile in Clay
Deflections of laterally loaded pile groups are strongly affected by the degree of pile head fixity. If the cap provides perfect restraint against rotation, deflections are only about...
Resistance Factors for Single Driven Piles from Experiments
Evaluation of the Retained Earth MSE Wall System
Final Report
Evaluation...
Civil Engineering Magazine Archive
The Civil Engineering Magazine Archive provides a record of civil engineering achievements and professional issues published in Civil Engineering Magazine, the official publication of the American Society...
Zemmouri, Algeria, Mw 6.8 Earthquake of May 31, 2003
Prepared by the Earthquake Investigations Committee of the Technical Council of Lifeline Earthquake Engineering ASCE. This TCLEE Monograph summarizes...
San Simeon Earthquake of December 22, 2003 and Denali, Alaska, Earthquake of November 3, 2002
Prepared by the Earthquake Investigations Committee of the Technical Council of Lifeline Earthquake Engineering of ASCE. This TCLEE Monograph provides...
Book Review:
Book Review:
Life-Cycle Environmental Accounting and Decision-Making for Bridge Structures
This presentation focuses on life-cycle environmental accounting and decision-making for bridge structures using the example of steel and steel-reinforced concrete....
Flexural Behavior of Slender Post-Tensioned Masonry Walls
The 2002 edition of the Masonry Standards Joint Committee (MSJC, 2002) design provisions for masonry structures includes a chapter on the design of post-tensioned masonry (PTM) walls with...
Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...
Return to search