Resistance Factors for Single Driven Piles from Experiments

Cyclic Lateral Loading of Large-Scale Pile Group

Pile-Head Behavior of Rigidly Capped Pile Group

A History of Environmental Engineering in the United States
Environmental engineering is a relatively new name for a type of engineering that began in the United States in the 1830s. Under different names, it continued to evolve to satisfy environmental...

Flexural Behavior of Slender Post-Tensioned Masonry Walls
The 2002 edition of the Masonry Standards Joint Committee (MSJC, 2002) design provisions for masonry structures includes a chapter on the design of post-tensioned masonry (PTM) walls with...

Detailing and Design Examples for Torsional Members
The nature of the internal force flow in a concrete member subject to torsion brings about both longitudinal and transverse force components. The resulting tension brought about by the...

Review of Stabilization of Clays and Expansive Soils in Pavements and Lightly Loaded Structures—History, Practice, and Future
Expansive clay soils—those that change significantly in volume with changes in water content—are the cause of distortions to structures that cost taxpayers several billion dollars annually...

Atmospheric Corrosion Resistance of Structural Steels
The main objective of this paper is to provide engineers with data on thickness loss of structural steel members resulting from corrosion. To this end, the writers have collected atmospheric...

Assessing Long-Term Pollutant Concentration Trends in Urban Runoff for TMDL Planning and Regulatory Assessment
Loads of some pollutants in many urban watersheds include a substantial component originating with non-point sources and stormwater runoff. TMDL planning includes estimating those loads,...

Nonionic Organic Solute Sorption to Two Organobentonites as a Function of Organic-Carbon Content
Sorption of three nonionic organic solutes (benzene, trichloroethene, and 1,2-dichlorobenzene) to hexadecyltrimethylammonium-bentonite (HDTMA-bentonite) and benzyltriethylammonium-bentonite...

Lesssons Learned from Experience Dealing with Risks of Extreme Events: Part II
For every known IS vulnerability, there is a matching countermeasure. However, we do not know all IS vulnerabilities. The following tasks are geared towards identifying IS vulnerabilities,...

Wind Load Provisions
This chapter discusses the different procedures for evaluating design wind loads for buildings....

Stability and Loads
This chapter examines stability and loads. Topics include stability and lateral load resistance during construction; effective lengths of cantilever columns; effect on stability of frame...

Design Loads
This chapter discusses the types of loadings that should be considered when designing overhead power lines utilizing fiber-reinforced polymer (FRP) poles. For infrastructure applications...

Loading Requirements for FRP Poles Utilized in other than Utility Line Applications

Load Test Program Pays Off

Micropiles: Think Small for Big Loads

Guidelines for Testing Large Seismic Isolator and Energy Dissipation Devices
This report outlines the HITEC Technical Evaluation Plan for large seismic isolator and energy dissipation devices. The plan is designed to characterize the fundamental properties and...

Breakwaters '99
First International Symposium on Monitoring of Breakwaters
The papers present state-of-art methods and technologies that are used in the structural and environmental monitoring of rubble mound breakwaters. Structural monitoring concerns the structural...

Update of ASCE Manuals and Reports on Engineering Practice No.74 Guidelines for Electrical Transmission Line Structural Loads
For many months there has been doubt that the latest version of ASCE Manuals and Reports on Engineering Practice No. 74. Guidelines for Electrical Transmission Line Structural Loading,...

 

 

 

 

Return to search