Constructability Considerations When Designing Drilled Shaft Foundations for Bridges

Special Report: Drilling for a Miracle

Equipment
This chapter examines the types and sizes of equipment required to drill grout holes, proportion and mix grout materials, and deliver and inject grout into the holes in an underground...

Grout Hole Layout
The drilling method, either rotary or percussion, and the type and size of the drills to be used are selected based on such factors as rock type, depth of holes required, working space...

Grout Placement Operations
This chapter discusses grout placement operations. The procedures for drilling, proportioning and mixing, and injection used in underground grouting are basically the same as those employed...

Shaft Capacity of Driven Piles in Clay

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Five
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Four
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Three
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Two
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Side Resistance in Piles and Drilled Shafts (The Thirty-Fourth Karl Terzaghi Lecture)

Flexural Behavior of Drilled Shafts with Minor Flaws

Construction Practices and Defects in Drilled Shafts

Review of Augered Pile Practice Outside the United States

An Alternative Approach
An innovative foundation system at a Virginia power plant relies on columns constructed via jet grouting to support elevated units that reduce pollution. The approach required less drilling,...

Advances in Constructibility for Drilled Foundations: Part I

Shoring Up Shaft Specifications: Collaboration for Constructibility

Advances in Constructibility for Drilled Foundations: Part II

Deep Freeze
In engineering, overcoming a failure can sometimes be more instructive than completing a project with unqualified success. Such was the case with the collapse and repair of a force main...

 

 

 

 

Return to search