Risk in Geotechnical Practice: Unraveling Foundation Uncertainty
Statistical Analysis Offers a Rational Approach for Controlling Foundation Risk in Design-Build Projects. For the past 20 years, design-build (DB) procurement has become the default for many transportation...

Learning From Pile Driving Failures: Out of Sight Can't be Out of Mind
The design of driven pile foundations for static service and strength limit state loading conditions is meaningless if the piles cannot be driven to the required depth and nominal resistance without sustaining...

Tsunami Loads and Effects
Guide to the Tsunami Design Provisions of ASCE 7-16
The devastating tsunamis that struck Chile and Japan in 2010 and 2011 underscored the critical need for new structural design criteria to improve building resilience and safeguard human life. They also...

Mixed Foundations Resolve Complex Conditions
A 46-story residential tower currently under construction in downtown Boston abuts an existing parking garage, necessitating extreme care to ensure its stability amid tight space constraints. Part of the...

A Combo Foundation Does the Job: Piled-Raft Foundation Design for a Supertall Skyscraper
Lotte World Tower is a 123-story, 555-m supertall skyscraper with a 6-level basement for retail and car parking located at Jamsil-dong in Seoul, South Korea. (Editor’s Note: For additional information,...

Under-Slab Utility Installation with Aggregate Piers: It's All About Planning
Aggregate pier ground improvement is commonly used in North America to support buildings. The technology has expanded in the last decade thanks to refinement and introduction of new techniques, more rigorous...

Immortal and Ethereal Beauty in Stone: The Taj Mahal
The Taj Mahal, probably one of the most beautiful structures in the world, has withstood the vagaries of history and the environment. Lengthy tomes have been written on its beauty and the details of the...

Glacier Skywalk: Foundations for a Canadian National Park Landmark
Jasper National Park, the largest national park in the Canadian Rockies, is located in the Province of Alberta, north of Banff National Park and west of Edmonton. Declared a UNESCO World Heritage Site...

Using Geophysics to Assess Geohazards Before Construction: Increase Your Odds for Success!
Understanding subsurface conditions is the key to any successful construction project, including new construction, excavation, and drilling. The consideration and understanding of the subsurface geology...

Avoiding Impacts of Collapsed Mines on Railways: A Multidisciplinary Geophysical Detective Approach
The presence of abandoned mine workings can pose a significant risk to the use and development of surface structures above them, including railway lines. Typically, the adverse and often sudden effects...

Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...

Offshore Technology in Civil Engineering
Hall of Fame Papers: Volume 11
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE<\p>Offshore Technology...

Optimized Drilled Shaft Design through Post-Grouting: Shorten That Shaft for Better Performance
Tip post-grouting is a technique used to inject, under pressure, a neat cement grout beneath the base of a drilled shaft. This method enhances or improves axial load-displacement performance by increasing...

Foundation Reuse and Enhancement: A Viable Option for Bridge Widening and Replacement Projects
The transportation system in the U.S. includes over 607,000 bridges for grade separations, interchange configurations, and stream crossings. As governmental entities embark on the rehabilitation and rebuilding...

What Does the Case Law Say? Geotechnical Risk on Design-Build Projects
The growth of design-build (DB) contracting, particularly on public-sector civil projects, has generated a great deal of industry discussion over the age-old question of who should bear the risk of unforeseen...

A History of Deep Vibratory Methods for Ground Improvement: A Cost-Effective Foundation Solution for 80+ Years
Deep vibratory ground improvement methods, collectively referred to as vibro systems, have been utilized by the construction community in one form or another for the past 80 years. Development of the equipment,...

Ground Improvement for Underground Construction: The Good, the Bad, and the Ugly
Underground construction is "special" because the work may be performed at great depths and under high groundwater pressures. All too often, it seems to take place in urban areas where there is limited...

The 2010-2011 Canterbury, New Zealand, Earthquake Sequence: Impetus for Rethinking the Way We Evaluate and Mitigate Liquefaction
Liquefaction is a common cause of ground failure during earthquakes and is directly responsible for tremendous damage to infrastructure. Evidence of the impact of liquefaction includes failure of bridge...

A Foundation Engineering Trip Down the Mississippi: Foundations for Mississippi River Bridges from Minnesota to Louisiana
Huckleberry Finn had his adventure, but for those interested in foundation engineering, this article will float you down the Mississippi River on your own encounter with the many bridges...

Spread Footings Revisited: Geotechnical Advances Lead to Expanded Use for Bridge Abutments
The Minnesota Department of Transportation (MnDOT) has historically used steel shell piles to support highway bridge structures, probably due to a blend of familiarity and efficiency among...

 

 

 

 

Return to search