Bolt Bearing Behavior of Engineered Wood Composites

Evaluation of Nail Dowel Bearing Strength Expression

Securing the Stone
To prevent spalling at edges on thin stone veneer, engineers who design stone cladding pay special attention to the connection details. Kerf clips, 100-150 mm long, that distribute load...

Numerical Simulations of Load Transfer Between Doweled Pavement Slabs

Testing of Splices of Prestressed Concrete Piles

Mechanical Behavior of Dowels Embedded in Concrete
In this paper an experimental investigation on the behavior of dowels embedded in concrete is described. The dowel strength under monotonic forces with two different boundary conditions...

North Ramp Pavement Evaluation/Rehabilitation—Houston Intercontinental Airport
The North Ramp at Houston's Intercontinental Airport is approximately 23 years old and serves Terminals A and B and also serves as a primary taxiway. Prior to having the new international...

Bond and Dowel Action of a Main Bar in a RC Beam
The bond and dowel action are analytically treated independently on each other in most cases. The bond behavior may be, however, much affected by the dowel action in structural members....

Dowel Bar Inserter for P.C.C. Pavements

Finite Element Modelling of Discrete Cracks in Reinforced Concrete by Contact Elements

Subway
Peachtree Center Station is the only mined transit station in the U.S. using reinforced native rock for permanent support. The station, serving some 34,000 patrons a day, is the largest...

Cyclic Shear and Dowel Action Models in R/C
The transfer of reversed cyclic shear forces across cracks in reinforced concrete by interface shear transfer and by dowell action is treated in this paper. Experimental cyclic shear load-shear...

Dowel Action in Concrete Beams Subject to Torsion
The test program included 14 beams, two of which were of plain concrete, six longitudinally reinforced with corner bars of varying diameters, and six with both longitudinal and transverse...

Structural Analysis of Concrete Pavement Systems
Performance of concrete pavements is controlled by the behavior and performance of the jointing system used, especially the performance and load transfer efficiency of the joint. A finite-element...

Glulam Bridge Dowel System
Strength and serviceability of timber bridges have been greatly improved by the use of glulam stringers and deck panels as the basic components. Pault and the writer studied composite...

Interface Shear Transfer and Dowel Action in Cracked Reinforced Concrete Subject to Cyclic Shear

Analysis of Dowel Action
The shear capacity of the longitudinal reinforcement in concrete beams acting as a dowel across a diagonal tension crack is analyzed, based upon the concept of a beam on an elastic foundation....

Wood Research in Railroad Industry
Extensive research has been conducted on the two principal causes for wood cross tie replacement, abrasion from the tie plates, and tie splitting. Repeated laboratory loading tests correlated...

Design of Dowels in Transverse Joints of Concrete Pavements
DataNotAvailable...

Effect of Dowel-Bar Misalignment across Concrete Pavement Joints
DataNotAvailable...

 

 

 

 

Return to search