Geotechnical Instrumentation for Roadways: Shifting from Manual to Automated
Geotechnical instruments, including inclinometers, piezometers, settlement plates, etc., have long been used during and after construction to monitor performance of transportation infrastructure, including...

What Does the Case Law Say? Geotechnical Risk on Design-Build Projects
The growth of design-build (DB) contracting, particularly on public-sector civil projects, has generated a great deal of industry discussion over the age-old question of who should bear the risk of unforeseen...

Geotechnical Delivery on Mega Transportation Projects: Challenges of Accelerated Delivery
Transportation projects have traditionally been delivered through the design-bid-build (DBB) delivery model, which continues to be the preferred method of delivering the majority of smaller and more traditional...

The Evolution of Launched Soil Nails: A 30-Year Retrospective
Launched soil nails are a unique remedial technology in the geotechnical construction toolbox. These 20-ft-long, 1.5-in.-diameter nails are installed in a single shot using a compressed air "cannon" at...

Ground Improvement for Underground Construction: The Good, the Bad, and the Ugly
Underground construction is "special" because the work may be performed at great depths and under high groundwater pressures. All too often, it seems to take place in urban areas where there is limited...

Extreme Makeover: Interchange Gets Ground Improvement Facelift
As part of the massive, $159.9 million Interchange 14A Improvement Project in the cities of Bayonne and Jersey City, NJ, the New Jersey Turnpike Authority (NJTA) is realigning 12 ramps and roadways and...

The Rise of UAVs Signals a New Era in Geotechnics: Big Data in Geotechnics is Coming from Above
If you have been following the news, browsing the internet, or even gazing up in the sky, it is likely that you have seen an Unmanned Aerial Vehicle (UAV), also commonly known as Unmanned Aircraft System...

Performance-Based Earthquake Engineering: What Can It Do for You?
There's been a lot of talk, and some confusion, lately about performance-based earthquake engineering (PBEE). Many geotechnical engineers wonder -- what is it, how does it differ from what I've been doing,...

Post-Earthquake Reconnaissance Using Digital Imagery: A Bird's-Eye View
Over the last decade, remote sensing has played an increasing role in geotechnical earthquake reconnaissance through the use of satellite imagery, LIDAR, and unmanned aerial vehicles (UAVs). These techniques...

Dry Dams and the Dayton Flood of 1913: The Origins of Integrated Systems Engineering Concepts
This article examines the history of integrated flood protection with particular focus on the 1913 Dayton Flood....

What's New in Geo? – Sustainable Biogeotechnics
Biogeotechnics will likely become part of mainstream geotechnical engineering in the future....

Small Projects are Big Deals
Geotechnical engineers work on a wide array of projects, ranging from small retaining walls or pavement projects, to construction of dams, canals, and foundations for bridges and high-rise...

The Leaning Towers of Wilmington, Delaware: Emergency Response and Retrofit of the I-495 Viaduct to Address Lateral Squeeze
On a sunny, summer afternoon last June, the project manager for AECOM's open-end bridge design contract with the Delaware Department of Transportation (DelDOT) received an...

Geotechnical Risk Management: The Five Non-Technical Topics that are Crucial for the Successful Practice of Geotechnical Engineering
It is fair to state that the aspects of civil design and construction referred to as geotechnical engineering can be characterized as inherently risky. Geologic processes are complex,...

GeoTechTools – Your Ground Modification Website: Solutions for Improved Decision Making and Risk Mitigation
An immense web-based toolbox for the engineering and construction of earthworks is now available at GeoTechTools.org. This exciting collection...

Making Big Data Work for You and Your Project: A 3-D Geotechnical Model is a Smart Way to Work
Modeling the stratigraphy beneath a site and assigning soil and rock properties are important steps in geotechnical engineering. Geotechnical engineers often need to model ground conditions...

BIM in Geotechnics: The Benefits of Including Geotechnical Data in Building Information Modelling
Building Information Modelling (BIM) is becoming increasingly common around the world on building and civil engineering projects, but what are the benefits to geotechnical engineers and...

Introduction
The purpose of this white paper is to: foster understanding and transparency of analytical methods necessary to update and describe climate, including possible changes in the frequency...

Review of Climate Science for Engineering Practice
Weather and climate are a factor in civil engineering design and practice. Weather is defined as the state of the atmosphere with respect to wind, temperature, cloudiness, moisture, pressure,...

Incorporating Climate Science into Engineering Practice
This section provides a review of engineering practices and discusses how engineers canconsider climate change in their practice, given the uncertainty of the future....

 

 

 

 

Return to search