Minimum Design Loads for Buildings and Other Structures
Minimum Design Loads for Buildings and Other Structures provides requirements for general structural design and includes means for determining...

Field Quality Control
A good quality control program helps ensure that technical requirements of the grouting are met and also adds to the overall success of a grouting project. The quality control program...

Performance-Based Design Method (PBDM)
This chapter discusses the performance-based design method (PBDM). Topics include performance objectives; recommended analysis methods; modeling guidance; preliminary proportioning; acceptance...

Slope Effect on House Shrink-Swell Movements
(Originally published in Journal of the Geotechnical Engineering Division, 1980, 106(12), 1327-1344.)...

Effects of Impervious Area Estimation Methods on Simulated Peak Discharges
The variability of simulated flood discharges is evaluated using two methods for estimating impervious surfaces and common design methods in the Mission Creek watershed (31 sq km) located...

Floodplain Delineation of the Ranillas Meander in Zaragoza Using GUAD-2D
After the selection of Zaragoza (Spain) as the host city of the International Expo 2008, the Gobierno de Arag?n (i.e., the local government)...

Innovative Methods Used in the Design and Construction of the New Tacoma Narrows Bridge
On September 25, 2002, Notice-to-Proceed for a Design/Build Agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC)...

Pioneer Square Areaways
Pioneer Square, one of the earliest neighborhoods in Seattle, is adjacent to Elliott Bay. Much ofthis part of the city originally was built on existing land that used to get flooded. When...

Current Programs in American Post-Secondary Wood Design Education
Wood engineering has been a requirement in civil/structural engineering education curricula forcenturies. In 1990, a comprehensive survey was conducted of wood engineering educationprograms...

The Role of Aesthetics in Bridge Design
The role of aesthetics in current bridge design practice varies widely. Many bridgeprojects in the United States are developed without including aesthetics as one of theproject goals....

An Experimental Study on the Behaviour of Full-Scale Composite Steel Frames under Furnace Loading
In view of recent large fires in tall buildings, such as One Meridian Square (USA), East Tower Central Park (Venezuela), World Trade Center (USA) and Windsor Tower (Spain), there has been...

Structures Congress 2008
Crossing Borders
The 40th Structures Congress's technical program consists of 10 tracks and three poster sessions. The program covers practical design in the following topic areas including...

Evaluation of Geopier Rammed Aggregate Piers by Geopier Foundation Company
Final Report
Prepared by the Highway Innovative Technology Evaluation Center (HITEC). This report describes a HITEC evaluation designed to determine the basic capabilities...

Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-08/ACI 530-08/ASCE 5-08, Specification for Masonry Structures (TMS 602-08/ACI 530.1-08/ASCE 6-08) and Companion Committees
The Code covers the design and construction of masonry structrures while the Specification is concerned with the minimum construction requirements for masonry in structures. Some of the...

Design-Build Contract Complexities
There are many approaches or options that an owner may pursue in acquiring facilities. Depending on the owner's objectives, the DB project approach may offer unique benefits,...

Project Definition and Conceptual Design
In order to select a DB contractor, the owner must define its requirements for project implementation and for the completed project. These requirements are typically incorporated into...

General Terms and Conditions
DB commercial contract terms can differ from conventional design-bid-build project terms, depending primarily on the owner's objectives, the level of risk that is to be assigned...

Specifications for Design-Build Projects
This chapter discusses the various specifications that come with a design-build project, including owner-generated specifications and contractor-generated specifications....

Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Two
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...

Structures Congress 2007
The Congress' technical program was designed with the practicing structural engineer in mind while maintaining a rigorous standard for the academic presentations. Topics include:...

 

 

 

 

Return to search