Your Numerical Model Begins at the Site Investigation — Phase Improving the Suitability of Numerical Geotechnical Modeling
The success of an advanced geotechnical numerical analysis depends foremost on a thorough geologic and geotechnical understanding of the site, and thus the geometric definition and adequacy of input parameters...

IoT and Big Data in Geotechnical Construction: Connecting Drill Rigs to the Cloud
It’s almost impossible these days to escape the fervor and buzz surrounding technologies and concepts such as Big Data, Internet of Things (IoT), Machine Learning (ML), and Artificial Intelligence (AI)....

Advanced Data Analytics In Geotechnics: Adapting to the Big Data Era
Everyone is talking about the impact of artificial intelligence (AI) on the future of work. In one camp are people like the industrialist Elon Musk who fear the potential evils of AI and its possible impact...

Design of Submarine Pipelines Against Upheaval Buckling
This paper describes part of a comprehensive joint-industry project on upheaval buckling. It develops a semi-empirical simplified design method and detailed design methods based on a new numerical analysis,...

The Wait Is Over…DIGGS Is Here!
The roll-out of Data Interchange for Geotechnical and GeoEnvironmental Specialists (DIGGS) has started, and the Ohio DOT (ODOT) has already announced that it will be required beginning January 2018. This...

ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
The journal will meet the needs of the researchers and engineers to address risk, disaster and failure-related challenges due to many sources and types of uncertainty in planning, design, analysis, construction,...

Review of Climate Science for Engineering Practice
Weather and climate are a factor in civil engineering design and practice. Weather is defined as the state of the atmosphere with respect to wind, temperature, cloudiness, moisture, pressure,...

Achieving Success and Avoiding Failures with Permeable Pavements
This chapter provides experienced-based recommendations on how to achieve success with permeable pavements. This information is based on an informational survey completed by designers,...

Making Big Data Work for You and Your Project: A 3-D Geotechnical Model is a Smart Way to Work
Modeling the stratigraphy beneath a site and assigning soil and rock properties are important steps in geotechnical engineering. Geotechnical engineers often need to model ground conditions...

BIM in Geotechnics: The Benefits of Including Geotechnical Data in Building Information Modelling
Building Information Modelling (BIM) is becoming increasingly common around the world on building and civil engineering projects, but what are the benefits to geotechnical engineers and...

Dynamic Shearing Properties Of Compacted Clay
A series of 116 Q-type triaxial compression tests was performed using specimens of Goose Lake clay compacted at water contents ranging from 9 percent dry of optimum to 3 percent on the...

Estimation of Consolidation Properties of Clay from Field Observations
Analyses to obtain theoretical time-settlement curves for embankments typically make use of soil properties measured in the laboratory on small disturbed samples subject to strain rates...

Failure of a Large Circular Excavation
A circular excavation, 117 feet (36 m) in diameter by 90 feet (27 m) deep, was designed by an experienced engineering firm and construction was performed by an experienced contractor....

Failure of a Twenty-Foot High Retaining Wall
A cantilever retaining wall, designed in apparent accord with provisions in a civil engineering handbook, failed soon after construction. Analyses of the causes of the failure are presented....

Effective Stress Theory of Soil Compaction
The shape of the moisture-density curve obtained from compaction tests has been explained in terms of capillarity and lubrication, viscous water, and physico-chemical interactions. None...

Finite Difference Analyses for Sand Drain Problems
The geotechnical literature contains a number of papers in which sand drain installations are described and field performance is compared with theoretical predictions. Some of the field...

Design and Installation of Auger Steel Catenary Risers
The Auger export pipelines are connected to the TLP by steel catenary risers (SCRs). This is believed to be the first time steel pipe has been used for catenary risers. SCRs offer advantages...

Condition Indices, Performance Measures, and Managing Performance Data for Geotechnical Asset Management – Don't Get Buried!
Why don't transportation agency assets like pavements, bridges, and earthwork have a Check Engine light? Why can't you simply pull up the complete history and life cycle plan for them?...

Is There a Movement Toward Three-dimensional Slope Stability Analyses?
Over the past few years, interest in performing three-dimensional (3-D) slope stability analyses has surged. An increasing number of research papers on this topic are being published at...

Interactive Graphics Dynamic Analysis of Frames

 

 

 

 

Return to search