Microcrack Interaction Toughening in Ceramics and CMCs
The generation of microcracks, which causes an extension of the damage zone at values of stress intensity factor, K, below the expected critical level represented by KIC...
Stability of Beams in Eccentrically Braced Frames
As the link yields and strain hardens in an eccentrically braced frame, the beam segment-outside of the link is subject to a combination of high axial force and bending moment. For certain...
Locally Buckled Plastic Hinge Behavior Under Monotonic and Cyclic Loading Condition
In order to clarify the influences of local buckling under monotonic and cyclic loading conditions, experimental studies were carried out on W8x10 A-36 structural steel members subjected...
Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....
Tensile-Integrity Structural Concepts for the Lunar Surface
This paper suggests the use of tension cable structures of a particular type, Tensegrity structures, for a lunar base. Tensegric shells can be a system of bars and cable net. The shell...
Sintering of Lunar Glass and Basalt
Sintering of the regolith has been proposed as a method for producing construction materials from local resources at a lunar base. Applications for lunar 'bricks' include road beds, foundations,...
Strength and Fracture of Glass in the Lunar Environment
Due to the lack of water on the moon, the effects of hydrolytic depolymerization - stress corrosion cracking - will be nonexistent in glasses produced and used on the moon. This would...
Mechanical Properties of Compacted Lunar Simulant Using New Vacuum Triaxial Equipment
Mechanical stress-strain-strength properties of Arizona Lunar Simulant (ALS) are investigated by using a newly developed vacuum triaxial device that allows compaction under different initial...
Explosive Forming of Aluminum-Lithium Alloys
This paper proposes the use of explosive forming to form large, near net shape components for HLLV propellant tanks and structures in meeting this need. Combining with high strength to...
Simple and Efficient Methods to Produce Construction Materials for Lunar and Mars Bases
A microwave heating method and a cold press method are proposed as simple ways to produce construction materials on the Moon and Mars. The present experiment on the microwave heating method...
Denver International Airport Fabric Roof Design
The design of Denver's Landside Terminal Complex for the new Denver International Airport, called for some far reaching vision coupled with imaginative building technologies. Because of...
Adding Up Admixtures
The importance of preventive maintenance and lifecycle costs has put added emphasis on concrete performance. For many specifiers, chemical admixtures, added to concrete at the batch plant,...
Probability Model of Load Exceedances under Cyclic Loadings
A probability model for nonlinear load exceedances subjected to a Poisson process with reversible cyclic load pulses was developed and is presented in this paper. A reversible cyclic load...
Probabilistic Evaluation of Bearing Capacity of Shallow Foundations
A probabilistic model is developed to evaluate the bearing capacity of shallow foundations. The bearing capacity formulation proposed by Terzaghi is used but with the bearing capacity...
Fatigue Strength of Welded Joints Under Broadband Loadings
Twelve welded high strength steel cruciform specimens were tested under stochastic loadings to determine the influence on fatigue life of the bandwidth of the loading process. Constant...
Low-Cycle Fatigue Prediction for Ramberg-Osgood Type Materials
The prediction of low-cycle fatigue crack growth is successfully made by an equation employing the J-integral range. This equation, originally proposed by Dowling and Begley, is analogous...
A New Probabilistic Model for the Fracture Toughness of Concrete
Scatter of strength and toughness parameters as well as scale effect are often observed in brittle materials such as concrete. The recently developed Crack Diffusion Model is utilized....
Taming Tornado Alley
Some structures�such as nuclear power plants�need complete protection from tornadoes regardless of the high costs of design and construction. Public facilities need protection too, but...
Use of the Break-Off Method for the Evaluation of High Performance Concrete
The Break-Off test is one of the recent developments for testing in-place concrete strength. This research was undertaken to investigate the reliability of the Break-Off test as a measure...
Application of SMA Technology in Georgia
In 1991, the Georgia Department of Transportation participated in a cooperative effort with the Federal Highway Administration to conduct one of a series of field evaluations of Stone...
Return to search