Extended-Life Nuclear Waste Package Utilizing Redundant Corrosion/Containment Barriers

Modeling of Localized Electrochemistry Within Occluded Regions

System Selection of Concepts for Direct Disposal of Spent Fuel

Cathodic Protection Diagnostics for Corrosion Mitigation of Infrastructure Components

Microbiologically Induced Corrosion
Researchers investigating a building whose columns bled a colorless liquid found that the building was under attack by microorganisms. A community of bacteria had contaminated the fireproofing...

Incorporating Corrosion in Reliability-Based Design of Anchored Bulkheads
Corrosion of steel is an important factor in the design of marine structures. A reliability analysis of anchored bulkheads showed that corrosion changes the critical failure mode from...

Advancing Anchorage Technology
An overview of earth anchorage technology, with emphasis on current U.S. corrosion protection practice as compared to that used in Europe. Comments from U.S. practitioners involved in...

Bridge Deck Distress and Repairs
The primary cause of bridge deck deterioration are cyclic freeze-thaw exposures and reinforcing steel corrosion caused by the extensive use of de-icing salts. However, there are other...

Dallas Goes Trenchless
Dallas Water Utilities (DWU) has stopped relying solely on traditional open-cut trenching methods. Instead, we look to trenchless technologies to minimize costs and disruption to the public....

Corrosion Fatigue of Deepwater Offshore Materials
Evaluation of the fatigue life of offshore structures operating in depths of up to 10,000 feet (3,048 m) requires knowledge of the combined effect of axial and hydrostatic loading on the...

Tunnel Takes Cathodic Protection
Cathodic protection is nothing new for bridges and parking garages, but it has never been installed in a tunnel—until now. As part of a $15 million rehabilitation project, the method is...

Experimental Study of FRP Grating Reinforced Concrete Slabs

Pultruded Structural Shapes: Stress Analysis and Failure Prediction

Fiberglass Pretensioned Piles for Marine Environment

Improved Corrosion Protection for Flue Gas Systems Utilizing a Dual Liner Concept
A unique system of corrosion resistant materials has shown excellent performance and durability in flue gas systems for fossil plants, cogeneration plants, waste incinerators and waste-to-energy...

Designing for Corrosion Control
This presentation will discuss designing from several aspects: a. Designing of the item to lessen the affects of corrosion. b. Selection of non-corrosive materials in the designing process...

Recirculation Piping Replacement Project at Dresden Unit 3
This paper discusses the Recirculation Piping Replacement Project performed at Dresden Unit 3 during 1985 and 1986. It describes several of the technical and administrative problems associated...

Corrosion Control for Pipeline Crossings

Degradation Mode Surveys of High Performance Candidate Container Materials
Corrosion resistant materials are being considered for the metallic barrier of the Yucca Mountain Project's high-level radioactive waste disposal containers. Nickel-chromium-molybdenum...

An Electrochemical Approach to Predicting Corrosion Performance of Container Materials
The pitting potentials of nickel-rich Alloy 825 are measured in chloride-containing solutions at different temperatures and adjusted to different pH values. The pitting potentials were...

 

 

 

 

Return to search