Material Difference
It was only fitting that the design of a center dedicated to the visual arts on the campus of Franklin & Marshall College feature an interplay of materials — from glass and concrete to steel and...
Composite Special Moment Frames
Wide Flange Beam to Concrete-Filled Steel Column Connections
Prepared by the Composite Construction Committee of the Metals Technical Administrative Committee of the Structural Engineering Institute of ASCEComposite Special Moment Frames: Wide Flange Beam to Concrete-Filled...
Pervious Concrete
Pervious concrete consists of a hydraulic cementitious binding system combined with an open-graded aggregate to produce a rigid pavement with typically 15% to 25% interconnected void space....
Permeable Interlocking Concrete Pavement (PICP)
Permeable interlocking concrete pavement (PICP) consists of (impervious) manufactured concrete units that form permeable voids and joints, when assembled into a laying pattern. The openings...
Interactive Graphics Dynamic Analysis of Frames
Cyclic Response of Steel-Stud Framed Wall Panels
Resistance of Hardened Box-Type Structures
Aseismic Design of a 31-Story Frame-Wall Building
ASCE Foundation at the 2013 National Concrete Canoe Competition
Highlights from the 2013 National Concrete Canoe Competition, held June 20-22, 2013 at the University of Illinois at Urbana-Champaign, Urbana, IL....
Evaluation of the Vistawall MSE Wall System by T&B Structural Systems
Final Report
The Highway Innovative Technology Evaluation Center (HITEC), serves as a clearinghouse for implementing highway innovation by conducting nationally focused, collaborative evaluations of...
Evaluation of the Stone Strong Gravity Wall System by Stone Strong Systems: Final Report
This report was prepared as part of the HITEC evaluation for earth retaining systems. This evaluation was performed on STONE STRONG gravity walls, a precast modular wall developed, designed,...
Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE 5-11), and Specification for Masonry Structures TMS 402-11/ACI 530-11/ASCE 6-11), and Companion Commentaries
Building Code Requirements and Specification for Masonry Structures contains two standards and their commentaries: Building Code Requirements for Masonry Structures (TMS 402-11/ACI 530-11/ASCE...
Estimation of Curve Numbers for Concrete and Asphalt
All impervious surfaces are assigned a Curve Number (CN) of 98. However, no field or experimental evidence exists (to our knowledge) that shows why the impervious CN was assigned a value...
Size and Scale Effects on the Shear Strength of Concrete Beams
This paper identifies and discusses the role of proper geometric scale of relevant parameters in the size effect in shear, particularly in terms of practical beam design. In the overall...
Innovative Methods Used in the Design and Construction of the New Tacoma Narrows Bridge
On September 25, 2002, Notice-to-Proceed for a Design/Build Agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC)...
Non-Destructive Strength Evaluation of a Continuous, Reinforced Concrete Slab Bridge
In the state of New Mexico, a significant number of reinforced concrete slab (RCS) bridges provide service on interstate highways I-10, I-25, and I-40 that are subjected to large amounts...
Toward a Unified Approach to Anchorage in Reinforced Concrete Design
The introduction of rationalized design procedures for cast-in and post-installed anchors inEurope and the U.S. was intended to provide a uniform factor of safety for anchorages inconcrete,...
An Experimental Study on the Behaviour of Full-Scale Composite Steel Frames under Furnace Loading
In view of recent large fires in tall buildings, such as One Meridian Square (USA), East Tower Central Park (Venezuela), World Trade Center (USA) and Windsor Tower (Spain), there has been...
Return to search