Material Difference
It was only fitting that the design of a center dedicated to the visual arts on the campus of Franklin & Marshall College feature an interplay of materials — from glass and concrete to steel and...

Concrete Jungle: New York City and Our Last Best Hope for a Sustainable Future, By Niles Eldredge and Sidney Horenstein. Oakland, California: University of California Press, 2014

Pervious Concrete
Pervious concrete consists of a hydraulic cementitious binding system combined with an open-graded aggregate to produce a rigid pavement with typically 15% to 25% interconnected void space....

Permeable Interlocking Concrete Pavement (PICP)
Permeable interlocking concrete pavement (PICP) consists of (impervious) manufactured concrete units that form permeable voids and joints, when assembled into a laying pattern. The openings...

Pipe Characteristics
Microtunneling pipe should meet the following general requirements: Circular shape with a flush outside surface (including at the joints); Strength sufficient to withstand both the installation...

Pipe Design
The pipes and joints, once installed, must be capable of safely withstanding, for the project design life, all in-use service loads, including those associated with the following factors:...

Field Aspects
As soon as practical after their arrival at the project site, all pipes, fittings, and appurtenances should be thoroughly checked for compliance with the contract documents and accepted...

Axial Load Capacity of Pipe Piles in Sands
The axial load capacity of driven, open-ended, steel pipe piles in cohesionless soils, is often estimated using a method such as the American Petroleum Institute Recommended Practice 2A...

Behaviour of Open-Ended Pipe Piles in Sand During Installation and Loading
An experimental study was performed to investigate the physical processes which influence the axial load capacities of open-ended steel pipe piles in sand. A double-walled pipe pile was...

Axial Capacity of Steel Pipe Piles in Clay
Development of theories for the prediction of the axial compressive and tensile load capacities of driven piles is made difficult by a variety of factors, e.g., disturbance of the soil...

Enhanced Detection and Mapping of Buried Utilities—A Sustainability Perspective
The social and environmental impacts and benefits of projects make up the triple bottom line that represents a modern view of sustainable project development. Rather than considering only...

Resistance of Hardened Box-Type Structures

ASCE Foundation at the 2013 National Concrete Canoe Competition
Highlights from the 2013 National Concrete Canoe Competition, held June 20-22, 2013 at the University of Illinois at Urbana-Champaign, Urbana, IL....

Concrete Planet: The Strange and Fascinating Story of the World's Most Common Man-Made Material By Robert Courland. Amherst, New York: Prometheus Books, 2011.

Hydrodynamic Damping on Flexible Cylinders in Sheared Flow

Evaluation of the Vistawall MSE Wall System by T&B Structural Systems
Final Report
The Highway Innovative Technology Evaluation Center (HITEC), serves as a clearinghouse for implementing highway innovation by conducting nationally focused, collaborative evaluations of...

Evaluation of the Stone Strong Gravity Wall System by Stone Strong Systems: Final Report
This report was prepared as part of the HITEC evaluation for earth retaining systems. This evaluation was performed on STONE STRONG gravity walls, a precast modular wall developed, designed,...

Forces on a Large Cylinder in Random Two-Dimensional Flows

The Measurement of Wave Heights by Means of a Float in an Open-End Pipe

Wave-Induced Eddies and Lift Forces on Circular Cylinders

 

 

 

 

Return to search