The Modular Modeling System (MMS): A Toolbox for Water- and Environmental-Resources Management
Flood Frequency Prediction: A Methodology for Identifying Structural Uncertainty
Analysis of Dynamic Laterally Loaded Pile in Clay
Deflections of laterally loaded pile groups are strongly affected by the degree of pile head fixity. If the cap provides perfect restraint against rotation, deflections are only about...
Introduction
Safety Concepts and Risk Management
Roles of Regulations and Standards
Reliability Analysis
Reliability-Based Design
Reliability-Based Service Life Prediction and Durability in Structural Safety Assessment
Soils and Foundations
Assessment of Existing Structures
Quality Management of Structural Design
Human Error in Constructed Projects
Restoring Coastal Louisiana
Enhancing the Role of Engineering and Science in the Restoration Program
Louisiana's coastal wetlands represent a significant natural and economic resource for the state and the nation but have been disappearing at a rate of 25 to 35 square miles...
Reaching for the Sky
Tapei 101—soon to open its doors as the world's tallest building—will resist devastating typhoons, earthquakes, and sway with an ingenious system of outrigger trusses, supercolumns,...
A More Perfect Union
Established to promote greater public understanding of the United States Constitution, the National Constitution Center facility in Philadelphia is a structure of complex geometries articulated...
Life-Cycle Environmental Accounting and Decision-Making for Bridge Structures
This presentation focuses on life-cycle environmental accounting and decision-making for bridge structures using the example of steel and steel-reinforced concrete....
Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...
Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...
Members Subjected to Torsion Combined with Other Actions
The combination of torsion with bending and shear (T-M-V) in members with both transverse and longitudinal reinforcement is the most commonly encountered combination in practical cases....
Return to search