Site Constraints Complicate a Bulkhead Replacement: It Takes a Team to Overcome the Challenges
North American Aggregates (NAA), a leading supplier of aggregates in the New York area, recently constructed a new processing facility in Perth Amboy, NJ. One of the final components of the new facility...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Six
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Finite Element Analysis of Complex, Welded Tubular Joints
Chemical Grouting
Chemical grouting is used in underground construction primarily on soft-ground shafts and tunnels in an effort to control cohesionless or running ground conditions by modifying the soil....
Design of Municipal Wastewater Treatment Plants
Fully revised and updated, this three-volume set from the Water Environment Federation and the Environmental and Water Resources Institute of the American Society of Civil Engineers presents...
Heave Distress Problems in Chemically-Treated Sulfate-Laden Materials
Coupling Physical, Chemical, or Biological Methods for Innovative Groundwater Remediation Coupled Polymer Floods and Bio-Chemical Remediation Techniques for Enhanced Groundwater Treatment
Many groundwater remediation techniques are designed to remove or destroy contaminants
Book Review:
Modeling Fort Ord Site OU2's Remediation System Using Optimization
Fort Ord.s Site OU2 is located approximately 80 miles south of San Francisco near Monterey Bay in Monterey County, California. Fort Ord contains two landfills which were used for residential...
Biological Nutrient Removal (BNR) Operation in Wastewater Treatment Plants
Biological Nutrient Removal (BNR) Operation Wastewater Treatment Plants instructs readers in the theory, equipment, and practical techniques needed to optimize BNR in varied environments,...
Finite Elements in Geotechnical Engineering
Sensitivity of Raster-Based Model of Hillslope Hydrology and Sediment Transport to DEM Resolution
Driving Characteristics of Open-Toe Piles in Dense Sand
Redox Balance of Upper Mystic Lake and Effects on Cycling of Watershed-Derived Metals
Application of TOPNET in the Distributed Model Intercomparison Project (DMIP)
This paper describes the application of a networked version of TOPMODEL, TOPNET, as part of the Distributed Model Intercomparison Project, DMIP. The model implementation is based on a...
Impact of Chemically-Induced Clay Transport and Deposition on the Hydraulic Conductivity of a Natural Sand
The purpose of this paper is to understand in part the dynamic impact of surfactants on hydraulic conductivity for designing enhanced pump and treat operations. This paper has two aims:...
Fate of TCE in Phytoremediation Systems
The phytoremediation of trichloroethylene (TCE) and other volatile organic compounds (VOCs) has been developed from a mere concept to full applications over the past decade. However, the...
Thermal Cyclone Washing for Remediation of Petroleum Contaminated Soils
Thermal Cyclone Washing (TCW) is a soil remediation technology developed and tested at the University of Alabama in Huntsville. TCW is a combination of thermal, chemical, and physical...
Characterization of Anaerobic Microbial Consortium Response to Thiol-Reactive Compounds
The activity of anaerobes in wastewater treatment processes can be limited when a toxicant enters the system. For certain toxicants, along with the decrease in metabolic activity, an efflux...
Environmental Fluid Mechanics
Theories and Applications
Sponsored by the Fluids Committee of the Engineering Mechanics Division of ASCE. This report provides environmental engineers with a comprehensive...
Return to search