Stabilization of an Alluvial Channel in an Urbanized Area
Grade stabilization structures have been used for many years to control degradation of alluvial stream in the southwest. These structures result in reducing the gradient of the stream...
Longitudinal Channel Response Due to In-Stream Mining
This paper describes the analysis procedure developed for the Arizona Department of Transportation for the estimation of short-term longitudinal channel response due to in-stream mining....
Sediment Management with Submerged Vanes
Submerged vanes are small river training structures used for protection of streambanks against erosion and for amelioration of shoaling problems in navigation channels, at water intakes,...
Hydraulic and Scour Analysis for Muitiple Crossings of the Salt River, Phoenix, Arizona
Two new freeway systems currently being designed for the Phoenix metropolitan area, the East Papago Freeway and the Outer Loop Highway, will both cross the Salt River within a one mile...
Numerical Accuracies in Steady Open Channel Flow
The authors have reviewed the accuracy of the individual terms and formulations of the conservation of energy equation as used within the constraints of steady open channel flow modelling....
Sediment Transport, Hydraulic Retention Devices, and Aquatic Habitat in Sand-Bed Channels
Streams and rivers of all sizes and in all parts of the United States flow on sand-bed channels. Scour, Transport, and deposition of sediments particles are natural processes in these...
Sediment Transport and Aquatic Habitat in Gravel-Bed Rivers
Gravel-bed rivers experience dymanic conditions of flow and sediment transport. Long periods of bed stability are interrupted by shorter periods of bed mobility when major changes and...
Chute Design Using Concrete Building Blocks
Chutes constructed using concrete building blocks for erosion control on ephemeral streams have performed successfully. The chutes consist of a layer of blocks placed on a geotextile over...
Limitation to Standard Parshall Flume Calibrations
Parshall flumes are widely used for metering open channel flows. An inspection of the original study which developed the rating equations indicates that the flumes were not tested for...
Model Study of the Guadalupe River Bypass Culvert
A hydraulic model investigation of proposed channel improvements for the Guadalupe River Channel was conducted at the US Army Engineer Waterways Experiment Station in Vicksburg, Mississippi....
Design of a Lined Landfill on Compressible Clays
In mid-August, 1989, a 500,000m3 landslide occurred at a commercially operated landfill in central Maine. The landslide material consisted of municipal...
Significance of Yield Surface Corner-Like Effects in Inelastic Stability Solutions
This paper presents the author's experiences with finite element prediction of the inelastic stability of steel plate structures. The implications of linear versus nonlinear...
No Feet of Clay
The methods of dealing with hazardous waste are evolving. At Superfund sites, for instance, excavation and removal was once the popular choice for treating pollutants, but stabilization...
Hydraulic Engineering
This proceedings consists of papers presented at the ASCE National Convention on Hydraulic Engineering given July 30 to August 3, 1990 in San Diego, California. The Conference provided...
Leveling the Playing Field
As professional sports grow, so does the market for elaborate multi-use sports arenas. The new Target Center in Minneapolis features a unique movable floor, 68 luxury suites and a state-of-the-art...
Cables and Flexible Pipes in Contact with Sea Floor
Flexible offshore systems can be analyzed by a number of different techniques. The techniques described herein fall in the general category of finite element methods. Special cable elements...
Effective Length Factors for Type-PR Frame Members
The effects of PR-Type connections and loading arrangement on frame stability and the effective length factor of columns are evaluated for portal frames and three-story three-bay frames...
Behavior of Plates Under Partial Edge Loading
This paper addresses one of the common problems in designing thin-walled members, the ability of the shape to accommodate in-plane concentrated loads. Specific areas in which the problem...
Stability of Plates Under Eccentric Edge Loads
A linear finite element analysis was conducted to study the stress distribution in the web and the flange when the beam is subjected to a patch load applied in the plane of the web or...
Local Buckling Behavior of Plate Elements
In the elastic post-local buckling range, the stress distribution across the width of compression elements of light gauge steel shapes is nonlinear. For code implementations, these stress...
Return to search