Reliability-Based Design (RBD) For Everyone: (No Monte Carlo Simulation Required!)
In North America, the design of earth structures for transportation applications is most often carried out using load and resistance factor design (LRFD). In the U.S., the AASHTO LRFD Bridge Design Specifications...

The Present And Future Of Virtual and Augmented Reality In Geotechnical Engineering: This Technology Has Gone Way Beyond Gaming!
One of the greatest challenges with subsurface construction has always been our relative inability to visualize underground conditions that are often comprised of spatially variable soil and rock strata,...

Automated Model And Parameter Selection: Incorporating Expert Input into Geotechnical Analyses
Excavation for construction of MIT Stata Center in Cambridge, MA. This complex soil-structure interaction problem required advanced numerical methods and soil constitutive models. A) PLAXIS 3D model of...

Turn for The Better
The Johnson Street Bridge has served as a critical link to the city of Victoria, British Columbia, Canada, for many years. A single-leaf bascule bridge that is functional and visually appealing replaced...

Virtual Reality Helps Secure Public Approval
A design team used virtual reality to generate public approval of a proposed bike and pedestrian path for the west span of the San Francisco-Oakland Bay Bridge in California....

Calibration of Jackup Leg Foundation Model Using Full-Scale Structural Measurements
The fitness of jack-up rigs to operate in varying water depths and weather conditions is determined by "site-specific" structural assessments. These assessments are conducted by a wide range of companies...

A Preliminary Case for the Existence of Hurricane Alleys in the Gulf of Mexico
A review of hurricance intensity in the Gulf of Mexico suggests there are two alleys where hurricanes are roughly 20% more intense than elsewhere. This paper develops a physical basis for the alleys using...

Photogrammetry for Rock Engineering: A Snapshot of State-of-the-Art Rock Mapping
Generally speaking, photogrammetry is the science of turning photographs into 3D models. While flashy advertisements may convey the idea that it's as simple as pushing a button (e.g., on a drone remote)...

Making Big Data Work for You and Your Project: A 3-D Geotechnical Model is a Smart Way to Work
Modeling the stratigraphy beneath a site and assigning soil and rock properties are important steps in geotechnical engineering. Geotechnical engineers often need to model ground conditions...

BIM in Geotechnics: The Benefits of Including Geotechnical Data in Building Information Modelling
Building Information Modelling (BIM) is becoming increasingly common around the world on building and civil engineering projects, but what are the benefits to geotechnical engineers and...

Hydrologic and Hydraulic Design Methods
Computational methods for hydrologic analysis, hydraulic functions, and treatment capacity of permeable pavements vary depending on the complexity of the design and level of detail in...

Geo-Congress 2014
Technical Papers and Keynote Lectures
Proceedings of the 2014 Geo-Congress, held in Atlanta, Georgia, February 23-26, 2014. Sponsored by the Geo-Institute of ASCE. GSP 234, Geo-Congress...

Hybrid Modelling of Seismic Structure Interaction

A Fault-Rupture Propagation Model for Ground Motion Simulation

Dynamic Response of Laterally-Loaded Piles in Centrifuge

Mathematical Modelling of Intermediate Trusses

Numerical Modeling Applications in Offshore Petroleum Developments

Hydrologic Modeling in 2050: Knowledge Requirements in a Multi-Nonstationary Environment

Reflections from a Water Resources Modeler and Planner in 2050

Water Resource Management Modeling in 2050

 

 

 

 

Return to search