Los Angeles' Pipeline Rehabilitation Program
One-third of the City of Los Angeles' 7,000 mile water distribution system had been installed without internal protection. The Water System is aiming for a 900,000 foot per...
Fracture Response of Cement Matrices Reinforced with High Volume Fiber Fraction
Toughening mechanisms of cement matrices reinforced with high volume fiber fraction have been experimentally studied by quantitative image analysis and laser holographic interferometry....
Mixture Considerations for High Performance Cement-Based Composites
In the present paper, mixture considerations for producing high performance cement-based composites are discussed. Effects of different factors such as grain size and fiber reinforcement...
Experimental Techniques to Study the Microstructure of Cement-Based Materials
Techniques to identify phases and changes in microstructure within cement paste, mortar, and concrete using a scanning electron microscope and image analysis system are described. Backscattered...
Cement and Concrete Characterization by Scanning Electron Microscopy
The scanning electron microscope (SEM) is a powerful tool for the microstructural and chemical characterization of cement and concrete. Imaging techniques such as secondary electron, backscattered...
Studies of the Interfacial Properties of Fiber Reinforced Cement
The multiple fiber pull-out tests were conducted with steel wires and alkali resistant glass fiber strand in order to characterize the behavior of interface of fiber and cementitious matrix....
Simulation of Failure Processes in Cementitious Particle Composites
Progressive failure analysis in cementitious particle composites such as concrete requires a realistic description of the topology of the composite structure and the interaction of the...
Soil-Cement Mixed Wall Technique
This paper introduces the soil-cement mixed wall technique and its applications for the installation of cutoff walls, excavation support walls and soil-crete columns for soil stabilization....
Finite Element Analysis and Field Instrumentation of a Soil/Cement Arch
A two dimensional plane strain finite element analysis is used to predict the increase in stress on an existing tunnel caused by the addition of twelve feet of fill. The fill, soil/cement,...
Hydrocarbon Waste Stabilized with a Cemented Clay Matrix
Permeability of Cement Grout Plugs in Basaltic Rocks
Flow tests have been conducted on expansive cement grout plugs with diameters of 160 mm and 200 mm, and length-to-diameter ratios of one, in boreholes in basalt blocks, and in steel pipes....
Who Pays for the Unexpected in Construction
The problem of who pays for the unexpected in construction is discussed in relation to the testing and inspection of construction materials. Laboratory is often blamed for poor construction...
Out of the Lab...and into the Field?
Materials experts know very little about concrete's basic structure. Now, though, engineers at a research center sponsored by the National Science Foundation are working on...
Incorporation of Reprocessing Raffinates and High Level Solids in Cement
Reprocessing highly enriched uranium fuel from UKAEA Materials Testing Reactors produces highly active aqueous raffinate. This is currently stored. The UK strategy is for raffinate immobilisation,...
Oilcrete
Threatened by probable tightening of hazardous-waste legislation, oil companies are searching for ways to dispose of or stabilize oil-drilling byproducts. One way is cementitious stabilization...
Cement Stabilized Soil Retaining Walls
PCA Says Cement Use Will Rebound
Design and Construction of Soil-Cement Drop Structures
Soil-cement has been used as an effective and economical slope protection material for embankment dams and stream banks. This paper describes the use of soil-cement in the construction...
Availability of Portland Cement
A general description of economic, technical, and environmental factors that affect the types of portland cement available is presented. Economic factors have had a major effect on balance...
Asphalt Cement Specifications and HMA Performance
The standard specifications generally used for hot mix asphalt (HMA) are those published by the American Society for Testing and Materials (ASTM) or the American Association of State Highway...
Return to search