Development and Application of a Three-Dimensional Boundary-Fitted Circulation Model in Providence River

Phased and Layered Sampling for Navy Dredging

Constitutive Model for Viscoelastic-Fluid Dampers

Verification of the Shearstress Boundary Conditions in the Undertow Problem

The Influence of Boundary Conditions on Beach Zonation

LDV System for Towing Tank Applications
The design, construction, testing, and operation of a two-dimensional LDV system for use in a towing tank is described. The primary design considerations were underwater application, minimal...

Depth-Averaged Flow Model in Curvilinear Coordinates
Implementation of a depth-averaged model in orthogonal curvilinear coordinates permits to resolve questions about grid refinement, the representation of complicated boundaries, and the...

Reconstruction of Concentration Boundary Condition for Unsteady Pesticide Transport Modeling
A one-dimensional unsteady contaminant transport model which used an unsteady hydraulic field was used to model pesticides (metolachlor, metribuzin) in the Iowa River/Coralville Reservoir....

Thermal Stresses in Piezoelectric Materials: A Boundary Integral Formulation
With the increasing use of piezoelectric materials in electromechanical devices which are often required to function in thermally hostile environment, thermal stresses and their influence...

Irregular Wave Run-Up on Composite Rough Slopes

Hydrodynamics of Random Wave Boundary Layers

Displacement of Batter Piles in Layered Soil
The displacements of flexible vertical and batter model piles under eccentric and inclined loads in layered soil of clay overlying sand is studied. Horizontal and vertical displacements...

Observations on the Growth of an Internal Boundary Layer with a Lidar Technique
The distribution of atmospheric water vapor across a step change in surface humidity (dry-wet) was observed by a Lidar measurement technique under neutral atmospheric stability condition....

Effect of Roughness and Thickness of Biofilms on External Mass Transfer Resistance
The effect of roughness and thickness of biofilms on the dissolved oxygen (DO) concentration boundary layer thickness (DO CBLT) and the external mass transfer process in a biofilm system...

Hydrodiplomacy on Forester Creek
The goal of this paper is to share information regarding political battles confronting the engineer with regards to drainage issues and concerns. Very often drainage boundaries do not...

Implementation of Elastic Layered Theory for Design of Unbonded Overlays
The U.S. Army and Air Force have implemented the elastic layered theory for design of unbonded overlays for rigid airfield pavements. The procedure allows for design of unbonded overlays...

Boundary Forcing and a Dual-Mode Calculation Scheme for Coastal Tidal Models Using Step-Wise Bathymetry
Tidal energetics are persistent and important factors in almost all coastal regions. As such, it is important to employ techniques that can consistently reproduce observed tidal variations....

Extensions of Finite Element Dental Stress Analysis
Some two dimensional models for stress analysis of dental crowns are examined and compared in relation to boundary conditions and some other issues in finite element analysis. The current...

Modeling the Seasonal Circulation in Massachusetts Bay
An 18 month simulation of circulation was conducted in Massachusetts Bay, a roughly 35 m deep, 100×50 km embayment on the northeastern shelf of the United States. Using a variant of the...

To the Limits of Shotcrete Linings
In the 1950s for the first time shotcrete was used because an essential support measure to guarantee the stability of an underground opening in Austria, Detzelhofer (1). Since that time...

 

 

 

 

Return to search