Civil Engineering Aspects of the Fermi Atomic Power Station
Atomic power station will use liquid metal cooled fast neutron breeder reactor; uranium molybdenum alloy enriched with uranium 235 to be used as fuel; site, reactor building, sodium building,...

Lateral Buckling of I-Beams Subjected to Unequal End Monment
Experimental investigation into elastic and inelastic lateral buckling of aluminum alloy I-beams subjected to unequal end moments; approximate method for determining inelastic buckling...

Aluminum Applications for Highway Bridges
This paper includes a discussion of aluminum alloys recommended and used for highway bridges, a review of the aluminum accessories and appurtenances which are becoming standard usage of...

Fatigue Tests of Riveted or Bolted Aluminum Alloy Joints
Results for monobloc specimens, butt joints, and lap joint indicate that specimens with idle rivets have higher fatigue strengths than those with open holes; symmetrical joints have high...

Design of Aluminum Alloy Beam-Columns
DataNotAvailable...

Specifications for Structures of Aluminum Alloy 2014-T6: Third Progress Report of the Committee of the Structural Division on Design in Lightweight Structural Alloys
These specifications cover allowable stresses, design rules, and fabrication procedures for riveted heavy duty structures built of the high-strength aluminum alloy known commercially as...

Specifications for Structures of Aluminum Alloy 6061-T6: Second Progress Report of the Committee of the Structural Division on Design in Lightweight Structural Alloys
Specifications covering allowable stresses, design rules, fabrication procedures; basic allowable tensile stress is 15 kips psi based on minimum yield strength psi and minimum tensile...

Plastic Buckling of Eccentrically Loaded Aluminum Alloy Columns
DataNotAvailable...

Designing Aluminum Alloy Members for Combined End Load and Bending
DataNotAvailable...

Specifications for Structures of a Moderate Strength Aluminum Alloy of High Resistance to Corrosion: Progress Report of the Committee of the Structural Division on Design in Lightweight Structural Alloys
DataNotAvailable...

Specifications for Heavy Duty Structures of High-Strength Aluminum Alloy: Final Report of the Committee of the Structural Division on Design in Lightweight Structural Alloys
DataNotAvailable...

Specifications for Heavy Duty Structures of High-Strength Aluminum Alloy: Final Report of the Committee of the Structural Division on Design in Lightweight Structural Alloys
DataNotAvailable...

Observations on the Behavior of Aluminum Alloy Test Girders
DataNotAvailable...

Observations on the Behavior of Aluminum Alloy Test Girders
DataNotAvailable...

Riveted and Pin-Connected Joints of Steel and Aluminum Alloys
DataNotAvailable...

Riveted and Pin-Connected Joints of Steel and Aluminum Alloys
DataNotAvailable...

Physical Properties of Driven and Undriven Rivers of High Strength Structural Steels: Progress Report of the Committee of the Structural Division on Structural Alloys
DataNotAvailable...

Tests on Built-Up Columns of Structural Aluminum Alloys
DataNotAvailable...

Tests on Built-Up Columns of Structural Aluminum Alloys
DataNotAvailable...

Structural Application of Steel and Light-Weight Alloys: A Symposium: Foreword
DataNotAvailable...

 

 

 

 

Return to search