Rapid Recovery
In May 2017, the California Department of Transportation had to contend with a massive landslide that closed a section of the iconic State Route 1 through central California’s scenic coastal region of...

Pumping Up Flood Defenses
Completed in April 2018, the $731-million Permanent Canal Closures and Pumps project represents the final component of the overall Hurricane and Storm Damage Risk Reduction System that serves the greater...

Teaching Cars to Drive
The Michigan-based American Center for Mobility is located at a former World War II bomber factory, later an auto plant, that was environmentally challenged after decades of industrial use. Though the...

Arena of Books
The new Qatar National Library features a folded design with cantilevered corners on the exterior, while inside, an enormous single space for reading or socializing offers terraces stacked with bookshelves....

Training for Disaster
The structural complexes used to train first responders must accommodate a wide range of theoretical and practical learning. From classroom spaces to built-to-burn assemblies to buildings within buildings,...

A Good Cause for a Causeway: How Geotechnology and Project Delivery Restored a Roadway Embankment Crossing a Historically Challenging Soft Ground Site
As part of a Minnesota Department of Transportation (MnDOT) design-build project, a causeway was constructed in 2017 to replace an aging bridge in the southwest metropolitan area of Minneapolis. The causeway...

Design of the Future Mexico City Airport: Attaining Resilience in Soft Ground
The Lake Texcoco region to the east of Mexico City is famed for its deep lacustrine deposits of compressible clay, which amplify ground shaking during seismic events. The area is also gradually subsiding...

Design of Submarine Pipelines Against Upheaval Buckling
This paper describes part of a comprehensive joint-industry project on upheaval buckling. It develops a semi-empirical simplified design method and detailed design methods based on a new numerical analysis,...

Journal of Transportation Engineering, Part B: Pavements
The Journal of Transportation Engineering, Part B: Pavements will contain technical and professional articles on the planning, design, construction, maintenance, and operation of airport, roadway and other...

Testing the New Locks (part of "A Greater Wonder")
The recently completed third set of locks at the Panama Canal incorporates several civil components and hydraulic design features that are intended to reduce routine maintenance and conserve water. For...

Guidelines for Construction Vibrations: How Much Rattle is Too Much?
The study of construction/blast-related ground vibrations on structures, people, and objects is a surprisingly diverse field. Vibration sources vary from blasting, all types of construction equipment,...

Offshore Technology in Civil Engineering
Hall of Fame Papers: Volume 11
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE<\p>Offshore Technology...

Translating the Language of Soils: Developing a Soil Classification System for International Engineering Projects
Soil classification systems are used to help predict soil behavior and provide information to farmers, engineers, builders, agricultural extension agents, homeowners, community planners, and government...

Optimized Drilled Shaft Design through Post-Grouting: Shorten That Shaft for Better Performance
Tip post-grouting is a technique used to inject, under pressure, a neat cement grout beneath the base of a drilled shaft. This method enhances or improves axial load-displacement performance by increasing...

Geotechnical Aspects of Pavements: There's More to Roads than Asphalt and Concrete!
When you jump on the highway to make that commute to work, do you think much about what's under the surface you ride on? Pavements are layered systems designed to provide a strong structure to support...

Answering the $64,000 Question: Geotechnical Risk in Design-Build Projects
Subsurface risk may well be the aspect of most construction projects that has the greatest potential impact on a project's success or failure. Even when a thorough geotechnical investigation is conducted...

What Does the Case Law Say? Geotechnical Risk on Design-Build Projects
The growth of design-build (DB) contracting, particularly on public-sector civil projects, has generated a great deal of industry discussion over the age-old question of who should bear the risk of unforeseen...

Geotechnical Delivery on Mega Transportation Projects: Challenges of Accelerated Delivery
Transportation projects have traditionally been delivered through the design-bid-build (DBB) delivery model, which continues to be the preferred method of delivering the majority of smaller and more traditional...

You Designed It for the Big One, Right? Illustrating and Communicating Uncertainty in a Deterministic Seismic Hazard Analysis
In seismic regions of the U.S. and worldwide, engineers design structures to withstand seismic ground motions resulting from a large, rare earthquake. But definitions of "large" and "rare" depend on who...

The Leaning Towers of Wilmington, Delaware: Emergency Response and Retrofit of the I-495 Viaduct to Address Lateral Squeeze
On a sunny, summer afternoon last June, the project manager for AECOM's open-end bridge design contract with the Delaware Department of Transportation (DelDOT) received an...

 

 

 

 

Return to search