Finite Element Reliability of Two Dimensional Continua with Geometrical Nonlinearity
First and second-order reliability methods and the finite-element method are combined into a general methodology for reliability analysis of complex structures with uncertain characteristics...
Reduction of First Excursion Probability of Nonlinear Secondary System
This paper deals with reduction of first excursion probability of nonlinear secondary system subjected to seismic excitations. Especially, gap and friction characteristics are considered...
Dynamic Load Computation for Flexible Guideways Under Moving Vehicles Within a Multibody Approach
This paper addresses the problem of the dynamic interaction of vehicles with their supporting guideway. Because of topographical and environmental reasons, modern railways and magnetically...
Dynamic Reliability of Multi-Degrees-of-Freedom Structures with Hysteretic Characteristics Under Combined Random Loads
A method to estimate the dynamic reliability of hysteretic structures under combined loads is investigated. The response statistical moments of structures, with hysteretic characteristics...
Response Variability of Isolated Structure Due to Randomness of Isolation Devices
Effect of randomness of restoring characteristics of an isolation device, which is considered to result from the randomness of material properties, configuration and setting error, on...
System Identification Methods for Fault Detection and Diagnosis
Faults refer to any unexpected changes or modifications of existing structures resulting from extreme loads or other abnormal loading and environmental conditions. Such faults may effect...
Reliability of Control Systems of Building Structures by Active Tendons
In this paper, a numerical assessment on the reliability of a control system of building structures by active cables is performed. Some control experiments on a 23-story shear-wall building...
Safety Evaluation of a Tall Building
This paper uses the extended Kalman filter to perform the system identification of a tall building with the aid of recorded accelerograms obtained from strong-motion seismographs. The...
Diffusion Models of Fatigue Crack Growth with Sequence Effects Due to Stationary Random Loads
A new fatigue crack growth model that includes load sequence effects is formulated. This model includes a load history dependent parameter, the reset stress, which reflects the state of...
Analysis of Fatigue Crack Propagation Under Random Loading by Markov Chain
Fatigue crack propagation is simulated in terms of a discrete Markov process considering both the randomness of crack propagation resistance and the randomness of external loading, which...
Statistical Fatigue Crack Propagation of a Superalloy Under a Block Type Spectrum Loading at Elevated Temperature
A lognormal statistical model was developed for the prediction of crack growth damage accumulations of superalloys under a block type spectrum loading at elevated temperature. Both the...
Fatigue Reliability of Steel Structures in the Presence of Residual Stresses
An extended model for the assessment of fatigue reliability of steel structures in the presence of residual stresses is developed. The model explicitly includes the uncertainties of the...
The Effects of Thermal Variation in Fracture Toughness
Environmental temperature changes produce cyclic and thermal stresses in cylindrical structures. The probability of failure defined as the chance that a crack, growing under the influence...
Fatigue Crack Closure Under Random Loading
The goals of the research are to determine fatigue crack growth rates for stationary random amplitude loadings with arbitrary mean stress. Fatigue crack closure theory is applied to justify...
Time Variant Reliability Analysis Considering Corrosive Effects
In this study the influence of corrosion is determined as a function of the stress intensity factor, the frequency and the stress ratio of the loading process. The present study investigates...
Fatigue Reliability of Prestressed Concrete Bridges
Experimental studies indicate that fatigue is a random phenomenon. Therefore, the approach is based on probabilistic methods. The fatigue life of the prestressed concrete girder is estimated...
The Estimation of Allowable Strength Based on Fatigue Reliability of Welded Part and Base Metal of Rail in Korea
In the allowable stress design, the safety of structures have been ensured by safety factor based on static strength. Under dynamic loading condition, the allowable stress based on allowable...
Reliability Study of Ferrocement Slabs Under Cyclic Loading
A simple probabilistic approach to fatigue strength studies for ferrocement slabs is presented: A preliminary experimental program to obtain the relevant statistics was conducted and the...
Lifetime-Maximum Load Effect for Highway Bridges Based on Stochastic Combination of Typical Traffic Loadings
An efficient and accurate method is proposed for probabilistic assessment of lifetime maximum load effect on highway bridges caused by traffic load. Probability distribution of the lifetime...
The N-Year Maximum Mean Values and the Coefficients of Variation of Loads Subjected to Port and Offshore Structures
It is necessary to know mean values and coefficients of variation of loads in order to verify the safety of structures. In this paper, the N-year maximum mean values and the coefficients...
Return to search