Evaluation of Corroded Steel Bridges
In the United States there is a large inventory of corroded steel bridges. The evaluation of these existing bridges is difficult when considering all the uncertainties involved in deterioration....
Steel Plate Girder Alternate I-10/I-17 Interchange
The scope of the Phoenix I-10 Viaduct allowed extensive study for the optimization of this moderate span steel plate girder bridge. The value engineering studies lead to the use of the...
Queensboro Bridge Inspection and Rehabilitation
An in-depth inspection of the Queensboro Bridge revealed deterioration of certain elements on the lower level of the main bridge. These elements include the outer roadway cantilever brackets,...
Prediction of Deformations Due to Heat Curving
This paper summarizes the state of the art in the thermal deformation techniques. Alternate analytical methods are described. The limitations and accuracy of these models are noted, and...
Design of Steel Transmission Pole Structures
This document has been carefully prepared in an effort to provide an authoritative source of information about effective design and fabrication of steel transmission pole structures. The...
Measures Against Wind-Induced Vibrations of Bridges
The design of very flexible structures, such as long-span steel bridges, are frequently governed by wind-induced vibrations. This paper introduces the present situation of the cable-supported...
Wind Tunnel Aeroelastic Model Study of the Baytown Bridge (Steel Alternative)
Analytical and full bridge aeroelastic model studies performed to assess the aerodynamic stability of the steel alternative Baytown Bridge over the Houston Ship Channel are described....
Dynamic Behavior of Three J.S. Cable Stayed Bridges
Dynamic considerations in the design of three recently designed cable stayed bridges are discussed. The presentation includes analysis for eigenfrequencies and eigenmodes, assessment of...
The Far? Bridge?Long Life at Low Costs
The superstructure of the bridge is a steel structure which proved to be competitive compared to the tendered concrete solution, due to simple and rational design both structurally and...
Methods for Improving the Seismic Response of Concentrically Braced Steel Frames
This paper briefly reviews various factors contributing to the poor performance occasionally observed in concentrically braced steel frame structures during recent earthquakes. Several...
The Design and Construction of the Washington State Convention and Trade Center Over Interstate 5
The Washington State Convention and Trade Center is a 10-level, 1,000,000-square foot facility constructed over Interstate 5 in downtown Seattle. The project spans over three city streets...
Applications of Fiber Bundle Model to Structural Engineering
The bundle failure time has been studied extensively for both deterministic and random loads. The objective of this paper is to apply results in these studies to the dynamic analysis of...
Behaviour of Thin-Walled Channel Sections in Bending
The effects of local buckling on the behaviour and load carrying capacity of thin-walled cold formed steel plain channel sections is examined. The bending is applied in such a way that...
Simplified Steel Compression Member Design
The objective of this paper is to present a simplified method of designing steel columns subjected to axial loads and moments for use in situations where automated design methods are inappropriate....
Code Designed Steel Frame Performance Characteristics
Three similar steel ductile moment-resisting frame structures designed in accordance to the Uniform Building Code (1976-1985) are evaluated for their performance characteristics during...
Prediction and Measurement of Wind Response: Case Story of a Wind Sensitive Building
The wind-induced horizontal accelerations of a 43 story office tower in New York City were monitored during 11 occasions over a period of about six months. The building dates back to the...
Anchorage Forces for Z-Purlin Supported Standing Seam Roof Systems
This paper presents the results of a limited study to determine if the provisions of Section D. 3. 2. 1 'Anchorage Bracing for Roof Systems Under Load with Top Flange Connected...
Rational Design Approach for Tension on the Net Section
A study of the bearing and net section capacities of bolt connections for material thicknesses encountered in cold-formed members was conducted. This paper summarizes the findings as they...
Stability and Limit Loads of Steel Space Trusses
An investigation of the behavior of cold-formed steel space truss structures, under the interaction of local, member, and overall buckling is described. A Finite Element computer program...
Flexibly Connected Thin-Walled Steel Frame Response
The static response of flexibly connected plane frames composed of thin-walled steel members is presented. Analysis capabilities include post-local-buckling strength and elastic semi-rigid...
Return to search