Dugdale Model Applied to Crack Interactions
It is doubtful that modelling crack interactions problem within the context of elasticity adequately reflects the physical aspects as the failure of brittle material is approached. A model...
Contact Induced Damage
Contact induced damage is an important source of potential failure of engineering components. The particular applications where this damage occurs are in the automotive, aerospace and...
High-Resolution Interwell Seismic Experiments in Sedimentary Formations
High-frequency interwell seismic data were acquired to examine full waveforms recorded in the pulsed mode and in the swept mode as well as to perform traveltime inversion tomography for...
Flexible Plates for Control of Stress Distribution
Use of a flexible plate in minimization of soil reaction concentrations at the edge was analyzed. The analysis utilizes a solution for vertical vibrations of the circular flexible plate...
Evolution of Damage in Brazilian Test Using Holographic Interferometry
A common method for estimating the tensile strength of concrete is the Brazilian Test. The test is carried out by loading a cylinder on its side in diametral compression. Accodring to...
The Theory of Elasticity: 1950-1992 and Beyond: Concluding Remarks
Forty years ago the theory of elasticity could be completely characterized by A.E.H.Love in his monumental treatise as an effort to reduce to calculation the internal state of stress produced...
Discrete Mechanics of Sediment Transport
Usually a granular medium is being represented by a continuous approximation in which the degrees of freedom of individual grains are averaged away in favor of a partial differential equation...
Shear Resistance Models for Concrete Bridges
Statistical models are developed for the shear resistance of concrete bridge girders. Two structural types are considered: reinforced concrete T-beams and prestressed concrete AASHTO girders....
Structural Control Under Stochastic Seismic Loads
This paper presents a method of controlling nonlinear and hysteretic civil engineering structures subjected to stochastic earthquake ground excitations. Emphasis is placed on control of...
Properties of Aggregate-Cement Interface for High Performance Concrete
An experimental study of the interfacial zone between aggregate and cement paste was undertaken. Various factors such as type of aggregate, treatment of aggregate surface, mixing process...
A Cumulative Failure Criterion of Concrete Under Uniaxial Dynamic Compressive Loading
It has been previously reported that the strength and critical strain of concrete under impact increase with strain rate, but neither of them can predict failure. A cumulative damage parameter...
Experimental Investigation of Bending and Twisting Coupling in Thin-Walled Composite Beams
The behavior of a thin-walled ppen section composite material beam depends on the anisotropic mechanical properties of the panels that form the beam. A beam theory has been proposed for...
Erosion of Steep River Banks and Time Evolution Towards Equilibrium Channel Shape
A numerical analysis of the time evolution of straight river channels is presented. The bed and bank, material is taken to be coarse, non-cohesive and uniform in size. As a result of the...
Stability of Systems of Rigid Bodies by Bounding Theorems
The stability of systems of systems of rigid bodies subjected to conservative and dissipative forces is investigated by considering the minimization of a work function subject to the kinematic...
Finite Element Large Deflection Analysis of Cylindrical Shells with Different Types of Cutouts
Nonlinear finite element is used to find the elastic buckling load and the maximum deflection for cylindrical shells subjected to unsymmetrical pressures due to wind. These shells are...
Modal Analysis of Vibration Response for Condition Monitoring of Structures
The response of a structure to load is evidence of what the structure is; of the materials, members, connections and form of the structure. Response is evidence as well of the condition...
An Elasticity Solution for a Transversely Isotropic Material Containing a Spherical Shell Under Arbitrary Axisymmetric Loading
A three-dimensional elasticity solution is obtained for a transversely isotropic solid containing an isotropic spherical membrane shell. Perfect bonding is assumed between the shell and...
Locally Buckled Plastic Hinge Behavior Under Monotonic and Cyclic Loading Condition
In order to clarify the influences of local buckling under monotonic and cyclic loading conditions, experimental studies were carried out on W8x10 A-36 structural steel members subjected...
Thermal Load for p-Version Laminated Elements
A p-version finite element formulation is presented for determining temperature stresses in laminated composite axisymmetric problems. Formulation for a rectangular axisymmetric p-version...
Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....
Return to search