Structure of the Expert FRAMEX System on Fracture Mechanics
The FRAMEX expert system gathers, through independent modules, knowledge analysis techniques to be used by an expert for developing a fracture problem diagnosis. The system includes three...
Reliability Methods for Steel Members Subjected to Axial Load and Moment
There has been a significant amount of research performed on determining the reliability of elastic-plastic frames where failure is through the formation of a plastic collapse mechanism....
Fatigue Reliability of Ship Hull Girder
Based on estimates on uncertainties in wave loading and fatigue capacity the fatigue reliability of ship hull girder is calculated with respect to global vertical wave bending moment....
Effect of Air Gap on Platform Reliability
A simplified reliability study of the effect of lateral wave forces impacting the deck of a fixed platform is presented. The reliability of the deck legs, considered the primary resistance...
Challenges in Stochastic Structural Mechanics
Currently there are the emerging developments in stochastic computational mechanics, which includes stochastic finite elements and its applications in problems of random systems and random...
Sanitary Sewer Model with Database Management
While numerous water supply and stormwater system models existed, the few sanitary sewer models that were readily available were too simplistic for engineering design and master planning...
Sanitary Sewer System Modeling for Operation and Planning
Development of a Steady State Sanitary Sewer Simulation (S5) computer model helped Newport News, Virginia, enact an efficient sanitary sewer management...
GWPATH: Ground-Water Flow Path Analysis
GWPATH is an interactive software package for estimating horizontal fluid pathlines and travel time in fully saturated groundwater flow domains. GWPATH was developed for the IBM PC-AT...
Drawing up Waterproof Curtains
Curtain wall damage has recently become the number one source of building owner complaints. Until wall systems are designed with backup water collection systems and other details, leakage...
Boston's Water Distribution Corrosion Control Program
The Boston Water and Sewer Commission (Commission) was formed in 1977 with a mandate to maintain sound, economical, and efficient systems for water distribution and wastewater collection...
Monitoring the Effects of the Pipe Insertion Machine Technique
The results of an experimental study of the pipe insertion machine are presented in this paper. Strains induced in an adjacent pipeline, soil displacement, pipe deflection and vibrations...
Distribution System: Cost of Repair and Replacement
The Safe Drinking Water Act of 1974 mandates that EPA be concerned with the supply of potable water to the consumer. Although most emphasis has been placed on water quality as it leves...
Hydraulic Studies of Surface Drainage from Level Furrows
Field studies have been completed to quantify the surface drainage phenomenon from level furrows which were rapidly flooded and then drained from the inlet end of the furrow. The proportion...
Furrow Irrigation Performance Using Real Time Control
Computer simulations were conducted, using a simple feedback control algorithm, to determine the potential for improvement of irrigation performance using real-time feedback control. Field...
Surface Water-Groundwater Relations for Open Channels
For losing channels with clean wetted perimeters (no clogging layers), the seepage rate varies essentially linearly with depth to groundwater if the groundwater is relatively shallow,...
Determining Transit Losses for Water Deliveries by Use of Stream-Aquifer Models
Hydrologic modeling of stream-aquifer interaction commonly has been used to quantify transit losses associated with water deliveries, such as those from reservoir storage. This technique...
Conveyance Characteristics of Natural Channels in Wyoming
This paper addresses the quantification of instream or conveyance losses of water being transported within natural stream systems in Wyoming using a net total loss and incremental loss...
Simulation of Contaminant Transport Using NMOL Technique
In this paper, a new numerical method, called Numerical Method of Lines (NMOL), is used to solve initial-boundary value problems for solute transport in soils. The simulation results are...
Characterizing Groundwater Protection Zones
A method is presented for using geoelectrical methods along with a supporting systems methodology to define aquifer and/or well head protection zones. The systems methodology utilizes...
Atrazine in Subsurface Drain Water in Southern Louisiana
Atrazine was applied preemergent to corn on subsurface drained and undrained plots. Atrazine soil concentration and concentration and loss in drain water were determined for 243 days after...
Return to search