Finite Element Studies of Block Shear for Structural Tees
Structural tees are commonly used as tension members. As a first step toward testing the adequacy of the current design codes for net section and block shear failures near the connections...
This note summarizes recent progress in developing h-p adaptive finite element methods for the numerical solution of the Navier-Stokes equations. A brief review of the h-p strategies and...
Stochastic Finite Element-Based Reliability Analysis of Dynamically Loaded Frames
This paper presents the use of the Stochastic Finite Element Method (SFEM) for reliability analysis of steel frames subjected to dynamic loading, in the context of modal superposition....
A Class of Asymptotic Annihilation Algorithms for Structural Dynamics
A class of time integration algorithms is presented that asymptotically annihilate high frequency response while introducing little dissipation in the low frequency regime. The algorithms...
Explicit Integration Schemes in Structural Dynamics
Based on the recursive explicit form of Newmark ?-? method developed by Zienkiewicz for displacements, similar recursive expressions for velocities and accelerations are developed. General...
Minimum Required Lateral Stiffness of Structures
In this paper an approximate method is presented to calculate the minimum lateral stiffness required to insure global structural stability. The technique is based on setting the critical...
Limit and Post-Limit Behavior of Space Trusses
A numerical technique for the nonlinear analysis of space trusses taking into consideration such factors as load-eccentricity, initial crookedness of the member and nonlinear stress-strain...
A Kinematic Hardening and Softening Model of Concrete
In the present paper, a new loading surface calibrated by several typical uni- and multi-axial test curves is proposed. Following the associated flow rule, a relatively simple constitutive...
Inelastic Mechanisms in Dynamically Loaded Ceramics
The dynamic response of ceramic materials has been the subject of intense research in the past decade. In this paper, we succinctly describe a plate impact experiment of a star-shaped...
One Surface Model for Concrete with Non-Associated Damage Rule
The general formulation of a continuum theory for the inelasticity of concrete is derived. The internal theory of thermodynamics is used and the dissipation inequality is established....
Numerical Modeling of Air Bubble Transport in Spillway Flow Downstream from Aerator
A simple numerical model for simulation of air bubble transport in the flow downstream from an aerator is constructed and compared with laboratory experiments. The model consists of two...
Gravity Dam Response Including Interaction Effects
The seismic response of 2D gravity dam-reservoir-foundation including the wave absorption effect along the reservoir bed is analyzed in frequency domain using substructure approach. The...
Dynamic Effect of Sediment on Dam Hydrodynamics
The dam-reservoir-foundation interaction problem has been studied by many investigators. A two dimensional model of compressible porous media is employed to analyze the dynamic response...
Wave Loading Linearization for Offshore Structures
The linearization of Morison-type wave loading is to replace u|u| by cu, where u is a zero mean, stationary Gaussian random process and c is a constant. In the present study an optimal...
Myocardial Wall Stress: A Clinician's View
Definition of left ventricular (LV) wall stress is a parameter which has a valid application in clinical medicine. This paper discusses this application as it pertains to various cardiac...
Assessment of Left Ventricular Flow Dynamics Using the Finite Analytic Method: Potential for Clinical Applications
Left ventricular (LV) function is traditionally assessed from chamber wall motion, rheological properties of the myocardium, and invasive measurements of chamber pressure. In order to...
Effect of Stenotic Geometry on Blood Flow Behavior
The dynamic characteristics of the blood flow is affected by the area reduction of stenosis. To estimate the severity of stenosis, the information about the geometry should also be accounted....
Simulation of Blood-Heart Interaction: Validation of Approach
An existing pressure correction method to model unsteady flow with arbitrarily moving boundaries has been adapted to simulate the interaction of three-dimensional blood flow with a mitral...
A Computer Simulation of the Blood Flow at the Aortic Bifurcation with Flexible Walls
To understand the possible role of hemodynamics in the atherogenesis, especially the effect of the flexibility of the arteries, a two-dimensional numerical model for the blood flow at...
Finite Element Stress Analysis of a Spinal Segment
A large number of factors need to be determined to understand the biomechanics of a surgical procedure about the lumbar spine. Some of these factors are amenable to experimental investigations...
Return to search