Fibre Reinforced Shotcrete Case Studies of Wet and Dry Processes
Both wet shotcrete and fibre reinforced shotcrete are being increasingly utilised in the South African mining industry. This Paper describes two applications of fibre reinforced shotcrete...
CADD Applications in Transportation: Beyond Highway Design
Computer Aided Design and Drafting (CADD) software have become very prominent in the design of transportation facilities. There are currently a number of third party packages that operate...
Tutorial on Computer-Aided Design
These tutorial sessions are designed to provide a basic introduction to the use of Computer-Aided Design/Drafting (CAD) in transportation engineering, with particular regard to Civil Engineering...
A CADD Program for Simulating Turning Vehicles
The turning capability of one or more 'design' vehicles and their swept paths has a significant influence on the layout of transportation facilities such as roadway intersections, parking...
Technical Evaluations Necessary for Determining Site Suitability for a High-Level Waste Repository
Congress, under the Nuclear Waste Policy Act of 1982, as amended, has charged the Department of Energy with the responsibility for safely and permanently disposing of high-level radioactive...
Regulatory Views on Seismic and Fault-Displacement Parameters Needed for a Geologic Repository Design
This paper presents the regulatory views of the U.S. Nuclear Regulatory Commission staff on some of the significant issues related to the seismic and faulting design of a geologic repository....
Performance Goal Based Seismic Design Criteria for High Level Waste Repository Facilities
This paper proposes a set of deterministic seismic design and evaluation criteria based upon a specified probabilistic seismic performance goal for High Level Waste Repository (HLWR) facilities....
Factors Controlling Strong Ground Motion and Their Associated Uncertainties
Of special interest in strong ground motion modeling is a quantification of the degree of influence specific physical parameters have on the computed motions. Associated with the model...
Guidelines for the Development of Natural Phenomena Hazards Design Criteria for Surface Facilities
This paper discusses the rationale behind the guidelines, criteria, and methodologies that are currently used for natural phenomena hazard design and evaluation of DOE nuclear and non-nuclear...
ASTM C666 (A) Freeze-Thaw Durability of Air-Entrained Wet- and Dry-Mix Shotcrete
In order to assess the freeze-thaw durability of shotcrete, six samples of dry-mix shotcrete and one sample of wet-mix shotcrete were mixed outdoors at Hydro-Quebec's research institute...
A Natural Cleanup
For almost 30 years, nonvolatile petroleum hydrocarbons from used motor oil, diesel, gasoline and other automotive fluids had been released to an oil sum at a truck-maintenance facility...
Wind Engineering?Engineering for Wind Damage Mitigation
The establishment in 1970 of a new engineering discipline, wind engineering, was motivated by property damage caused by windstorms of 1970 known as the Lubbock Tornado and Hurricane Celia....
Simulated Earthquake Ground Motions for Design Purpose
In this paper, firstly, it was clarified that there is a case where in the long-period range there is seen a tendency to follow the ?+-2$/ model approximately while in the short-period...
Buildings with Response Control Systems in Japan
Today, there are more than 30 buildings with response control systems. The system is defined as one that suppresses or controls the response to the vibrational motion input of the buildings,...
Study of Failures of Towers and Tall Buildings Under Wind Loading
In this paper, two kinds of wind-excited limit states on a tall structure are investigated and corresponding formulae for the limit wind pressures are presented. In solving the wind-excited...
Response of Isolated Structures to Recent California Earthquakes
A significant amount of research and development, shake table testing computer modelling and real world applications have been performed with the seismic isolation design concept in the...
Response of Base Isolated Buildings in Japan to Recent Earthquakes
On February 2nd in 1992, more than 20 base isolated buildings in Tokyo experienced an earthquake of JMA seismic intensity 5. In this event, many acceleration records of isolated buildings...
Evaluation of Code Accidental-Torsion Provisions Using Earthquake Records from Buildings
Building code provisions for accidental torsion are evaluated from analysis of earthquake-induced motions of three nominally-symmetric-plan buildings. The results demonstrate that the...
Building Separation Rules to Avoid Seismic Pounding
A method to estimate the required separation to preclude pounding between adjacent buildings is presented. It accounts for the effect of yielding on the vibration phase of adjacent buildings....
Displacement Amplification Factor for Seismic Design Provisions
To estimate the maximum roof and story drifts occurring during severe earthquakes, the UBC and NEHRP use 3Rw/8 and Cd...
Return to search