Concepts in Prototype Testing for In Situ Geomechanical Investigations at Yucca Mountain
Geomechanical investigations comprise a significant portion of the site characterization program to be conducted at Yucca Mountain, the site of a proposed repository for nuclear waste....
Willingness to Pay for Stormwater Infrastructure
The contingent valuation method is used to estimate the willingness of Baltimore County homeowners to pay for stormwater controls to reduce nutrient loadings to the Chesapeake Bay. Homeowner...
Restoration of a Buttress Dam
Inspections of Morris Shepard Dam on the Brazos River in Texas revealed serious defects in the dam and its foundation. Piezometric pressures below the spillway buttresses greatly exceeded...
InTransit: Processing and Analyzing Transit Service Data with the Macintosh
InTransit is a database application based on 4th Dimension designed to facilitate the data processing and analysis phases. InTransit, in its present form, can process both ridecheck and...
Resistance Coefficient in a Tidal Channel
In applying a numerical hydrodynamic model to the tidal channel-lagoon complex around Great Sound, New Jersey, it became apparent that the model guidelines for the resistance coefficient...
Eutrophication and Recurrent Hypoxia in the New York Bight: A Synthesis of Historical Data and a Numerical Model of the 1976 Anoxic Event
As a result of oceanographic programs conducted over the past four decades, a large historical data base is available, and has been used, to document areas of recurrent hypoxia and high...
Pipeline Design and Installation
The proceedings of the International Conference on Pipeline Design and Installation, held on March 25-27, 1990 in Las Vegas, Nevada, presents information on all aspects of pipeline design...
Sprinkler System Design for Frost Protection
Both undertree and overtree systems for frost protection by sprinkling are currently being used. The criteria based on experimental results and theoretical modeling have been reviewed...
A Modern Approach to the Design of Grassed Channels
The design of grassed channels can be based on modern fluid mechanics principles. The resistance to flow in a grassed channel is linked directly to the relative roughness of the flow through...
Strategies to Reduce Salt Load in Drainage Water
A study of irrigation efficiency, drainage flow and trace element loading in the drainage water from a 14000 ha irrigation district on the west side of the San Joaquin Valley of California...
Effect of Water Depth and Groundwater Table on Infiltration from Recharge Basins
The actual effect of water depth on infiltration depends on the depth to groundwater and on whether the wetted perimeter of the basin is clean or covered by a clogging layer of fine particles...
Design of Steel Transmission Pole Structures
The Bearing Capacity of Debris Flows
Debris flows are made of a cohesive muddy matrix in which large and heavy particles exist in suspension. To explain how these particles are maintained in suspension, several mechanisms...
Predicting Stream Width and Bank Retreat
The width of streams is dependent on the flood flow discharge which varies from year to year, the bank material which varies from stream to stream and reach to reach, the sediment load...
Resistance Consisting of Both Viscous Force and Dispersive Force
A set of specially designed experiments have been carried for studying the resistance of a flow consisting of water and both fine and coarse particles. The viscous force caused by fine...
Sediment Transport Characteristics of Hyperconcentrated Flow with Suspended Load
In this paper, based on the analysis of the ovserved data, a set of theories is proposed of the transport of heper-concentrated sediment, the basic points of which are: (1) The hyperconcentrated...
Stable Channel Analytical Design Method
The Flood-Control Channels Research Program is being conducted at the US Army Engineer Waterways Experiment Station to develop systematic methods for design of stable channels for small...
Can Erosion Control Meet Regulatory Standards?
An erosion control design method for rainfall/surface erosion is presented that enables the designer to determine design loads and the resulting erosion control requirements. Design loads...
Hydraulic Modeling of Flow Control Gates
Flow control gates are subject to complex hydrodymanic loadings, which may in many cases only be predicted through investigation on a physical hydraulic model. Scaling of gate models,...
Advances in Pipeline Materials
Pipelines transport water, storm run-off, process wastes, petroleum, natural gas, slurries, solids, sewage, steam and other fluids either by gravity or under pressure. Pipelines are also...
Return to search