Seismic Hazard Along a Central U.S. Oil Pipeline
An integrated approach is used to evaluate seismic hazards at six sites where pipeline 22 crosses the major rivers in West Tennessee. On the basis of historical and instrumental data,...
Seismic Hazard Analysis for Crude Oil Pipelines in the New Madrid Seismic Zone
The seismic vulnerability of three crude oil pipelines in and around the New Madrid Seismic Zone (NMSZ) is evaluated for a repetition of the 1811-12 New Madrid events. The seismic hazard...
Response of Model Pile Groups to Strong Shaking
The dynamic responses of small model pile groups to strong shaking obtained primarily from shake table tests are described and analyzed. As a basis for understanding pile group response,...
Seismic Pile-Group?Structure Interaction
A detailed multi-step procedure is outlined for a complete seismic soil-pile-foundation-structure interaction analysis, within the format of kinematic-inertial decomposition. Newly-developed...
An Alternative Analysis of Vibration Tests on Two Pile Group Foundations
Published quick-release horizontal vibration tests on two pile group foundations supporting large transformer banks are analyzed in this paper using the dynamic impedance approach embodied...
Observed and Predicted Response of Piles Under Dynamic Loads
Vibration tests were conducted on a single pile 450 mm diameter and driven to a depth of 17 m. The dynamic soil properties were also determined by conducting in-situ tests. The response...
Forced Vibration Testing of an Expanded Base Concrete Pile
Forced vibration testing of a full-scale cast-in-situ expanded base concrete pile supporting a structural mass was conducted as part of a test pile program for a paper mill expansion at...
Dynamic Parameters Analysis of Piles
This paper presents an analysis for the dynamic parameters of a single pile. The analysis allows consideration of pile-soil interaction, soil natural layered behavior and floating pile...
Design Loads for Sloshing in TLP Pontoons Tanks
Impact of fluid inside the Auger TLP ballast tanks on tank walls was investigated and changes made to the structural design in an accelerated fashion through the use of model testing....
Broadside Current Forces on Moored Ships
A method of estimating the static lateral current force on ships in deep and finite depth water is presented for the case of the current broadside to the ship. The method is based on recent...
Cyclic Behavior of a Deepwater Normally Consolidated Clay
A comprehensive advanced laboratory testing program was undertaken to study the cyclic behavior of clays under various combinations of one-way and two-way cyclic loading. This work was...
Pipeline Storm Behavior on Clay Soils
A series of transverse wave loading tests was conducted on a specially mounted section of pipe in a sediment-filled tank, to investigate the stability of unburied submarine pipelines under...
Upper Bound Limit Analysis of Deep Skirt Structures' Foundations
A solution to the problem of determining the bearing capacity of an embedded footing (foundation) subjected to arbitrary loading is being presented herein. It is primarily intended for...
Corrosion Fatigue of Deepwater Offshore Materials
Evaluation of the fatigue life of offshore structures operating in depths of up to 10,000 feet (3,048 m) requires knowledge of the combined effect of axial and hydrostatic loading on the...
Review of API Guidelines for Pipe Piles in Sand
Most offshore structures are supported using steel pipe piles which are designed in accord with API Recommended Practice 2A. The guidelines for analysis of axial capacity of steel pipe...
Effects of Freezing on Impact Properties of RTM Composites, and Their Applications in Offshore Structures
Resin transfer molding is rapidly being acknowledged as the process with potential to create perhaps the purest form of a composite material as representative of the concept of `material-by-design.'...
Lifeline Earthquake Engineering in the Central and Eastern U.S.
This proceedings,
Piles Under Dynamic Loads
This proceedings,
Electrokinetic Cleanups
Electrokinetic remediation of contaminated soils is a relatively new research area. Electrokinetic phenomena can be used to create barriers, and move particles, including pollutants such...
Measured to the Max
Engineers looking to model the behavior of a structure under seismic conditions often ignore the best source of data available: the building itself. Full-scale measurements of vibrations...
Return to search