On the Dynamic Response of Bridges by Oscillating Vehicles on Rough Surfaces
The spectral theory is applied to the response of bridges under a Poissonian stream of vehicles moving with constant speed over the bridge. The vehicles are modeled as oscillators with...
Reliability of a Suspension Bridge Under Traffic Flow
The problem of reliability of a single-span spatial suspension bridge under random highway traffic is considered. The displacements of the bridge are described by coupled, non-linear,...
Verification of NESSUS Code on Space Propulsion Components
Application of probabilistic finite element method to the structural analysis of typical space propulsion components such as turbine blades and high pressure ducts is reported. The study...
Application of Probabilistic Reliability Analysis Methods to Ariane 5 Unequipped Booster Case
The paper demonstrates the capabilities of probabilistic structure analysis methods as a tool to support the design and manufacture of the Ariane 5 Unequipped Booster Case within a RAMS...
Space Station Freedom Pressurized Module Meteoroid/Debris Protection
Protection of spacecraft from the effects of a meteoroid/debris particle impact can add significant weight to the required structure. This paper discusses the meteoroid and debris environments...
Pressure Vessels for Space Station Freedom
Space Station Freedom (SSF) will utilize more than 10 different types of pressure vessels for storage of oxygen, hydrogen, nitrogen and mixed gases at operating pressures ranging from...
Reliability Consistent Load and Resistance Factors
A practical algorithm to find the partial safety factors consistent with target reliability in LRFD format is proposed. The method is based on Second Order Second Moment method and Reliability...
A Reliability Analysis of Aerospace Structures Subject to Thermal Mechanical and Flight Loads
Aerospace structures are subjected to various flight loads throughout their service life. In certain anticipated missions, significant thermal stresses will be generated through atmospheric...
Rethinking Flood Control Channel Design
Until recently, the standard method of flood control was channelization�converting a natural stream to a uniform channel cross section. But this single objective approach is coming under...
Buried Structural Capacity of Insituform?
In July 1988, a test was conducted at Utah State University to determine the structural support that can be provided to a failing rigid pipe system through the use of the Insituform process....
Innovative New Drainage Pipe
Hydraulic tests on corrugated HDPE pipe with a smooth liner show that its Mannings n-value is in the range of 0.009 to 0.015 depending on the smoothness of the liners. With the smooth...
Combined Load Testing of Prestressed Concrete Cylinder Pipe
A series of combined load tests were run on prestressed concrete cylinder pipe in order to evaluate a proposed new method of design for pipe made to AWWA Standard C301. These tests involved...
Evaluation of Combined Load Tests of Prestressed Concrete Cylinder Pipe
Combined load tests of prestressed concrete cylinder pipe, presented by Tremblay in the proceedings of this conference, are analyzed. Data gathered during the tests includes first visible...
Designing Vitrified Clay Pipe Systems with EASE
NCPI has developed a computerized trench load design program which provides a broad and complete spectrum of design options which will enable engineers and contractors to safely design...
Structural Safety and Reliability
This proceedings of the 5th International Conference on Structural Safety and Reliability (ICOSSAR '89) held on August 7-11, 1989 in San Francisco, California contains almost...
Approach to Developing a Ground-Motion Design Basis for Facilities Important to Safety at Yucca Mountain
The DOE has proposed a methodology for developing a ground-motion design basis for prospective facilities at Yucca Mountain that are important to safety. The methdology utilizes a quasi-deterministic...
Concepts in Prototype Testing for In Situ Geomechanical Investigations at Yucca Mountain
Geomechanical investigations comprise a significant portion of the site characterization program to be conducted at Yucca Mountain, the site of a proposed repository for nuclear waste....
Willingness to Pay for Stormwater Infrastructure
The contingent valuation method is used to estimate the willingness of Baltimore County homeowners to pay for stormwater controls to reduce nutrient loadings to the Chesapeake Bay. Homeowner...
Restoration of a Buttress Dam
Inspections of Morris Shepard Dam on the Brazos River in Texas revealed serious defects in the dam and its foundation. Piezometric pressures below the spillway buttresses greatly exceeded...
InTransit: Processing and Analyzing Transit Service Data with the Macintosh
InTransit is a database application based on 4th Dimension designed to facilitate the data processing and analysis phases. InTransit, in its present form, can process both ridecheck and...
Return to search