Lifeline Earthquake Engineering in the Central and Eastern U.S.
This proceedings, Lifeline Earthquake Engineering in the Central and Eastern U.S., is a collection of papers presented at the 1992 American...

Piles Under Dynamic Loads
This proceedings, Piles Under Dynamic Loads, consists of papers that try to identify the state of practice in the analysis and design of pile...

Electrokinetic Cleanups
Electrokinetic remediation of contaminated soils is a relatively new research area. Electrokinetic phenomena can be used to create barriers, and move particles, including pollutants such...

Measured to the Max
Engineers looking to model the behavior of a structure under seismic conditions often ignore the best source of data available: the building itself. Full-scale measurements of vibrations...

Instrumenting the `Y'
Segmental bridges are still relatively new to the U.S. and questions persist about their design and behavior. To expand the knowledge base, a number of laboratory and field studies have...

Seismic Assessment of Tailings Dams
A significant portion of the operating and closed large dams in North America are tailings dams used to impound wastes from mining operations. Often these dams were built by mine personnel...

Safety Factors, Loads, and Impact
The loads given in this chapter are intended for general guidance only (including wind, ice, stream flow, etc.). Maximum deflections and rotations may likewise vary with national codes....

The Effect of Loading Rate on the Bending Strength of Alluvium Reinforced Ice
Traditional building materials are often less than ideal for construction in remote Arctic locations. Their mechanical properties may be degraded in extreme cold, and costs associated...

Sludge Dewatering in Freezing Beds
This paper summarizes the results of laboratory and pilot scale studies on the development of the sludge freezing bed. Laboratory studies indicated that a freezing bed could dewater up...

Experimental Study of Adfreeze Heaving of Augered Caisson Footings
In order to establish the required depth of augered caisson-type footings in cold regions and their optimal design against adfreeze heaving, an experimental field investigation has been...

Environment One: A Master Plan Study for a New Scientific Research Station at the Geographic South Pole
The existing research station at the geographic South Pole is approaching the end of its useful life. This master plan study focuses on determining the technical and functional requirements...

Analysis of Soil-Stress Cell Interaction
Static loading experiments conducted on a soil stress cell embedded in a sand are presented. Stress cell performance was evaluated by comparing the indicated stress against the expected...

Visco-elasticity and the Compressive Failure of Polycrystalline Ice
The analysis of the visco-elasticity of polycrystalline ice is addressed. Experimental results on isotropic and anisotropic polycrystalline ice are presented, which indicate that intracrystalline...

Microstructure and Mechanical Behaviour of Ice
Short descriptions are given for ice in nature, test methods used to evaluate their deformation behaviour and, a general microstructure-based constitutive equation. Equations suitable...

The Ductile-Brittle Transition in Ice & Size Effect
This paper considers the ductile to brittle transition in ice under compression. Two criteria, one phenomenological and the other more physical, are presented for the transition strain...

Preliminary Results of Direct Tension Tests on First-Year Sea Ice Samples
We present the initial results of our tests to determine the tensile behavior of columnar sea ice over a range of temperatures extending from -20 to -3?C and strain rates of 10-5...

Fracture Resistance to Cracking in Ice: Initiation and Growth
The issue of notch sensitivity and brittleness of the test failure is used to forecast the necessary specimen size for a material property initiation toughness; a methodology is developed...

Laboratory Observations of Macroscopic Failure Modes in Freshwater Ice
A review is presented of tests performed in the laboratory by several investigators on indentation in freshwater ice. A number of the observed failure modes are discussed. From the results,...

Effective Pressures Measured During Indentation Tests in Freshwater Ice
Indentation tests were conducted by pushing flat, vertical indentors of two different widths (50 and 100 mm) against the edges of floating, freshwater ice at different velocities (0.6-150...

Snow Fence Operational and Material Testing
The proliferation of snow fence products since the late 1970's presents an opportunity for optimizing the control of drifting snow. It also presents a challenge in discriminating...

 

 

 

 

Return to search