The Effect of Loading Rate on the Bending Strength of Alluvium Reinforced Ice
Traditional building materials are often less than ideal for construction in remote Arctic locations. Their mechanical properties may be degraded in extreme cold, and costs associated...
Experimental Study of Adfreeze Heaving of Augered Caisson Footings
In order to establish the required depth of augered caisson-type footings in cold regions and their optimal design against adfreeze heaving, an experimental field investigation has been...
New Admixtures for Cold Weather Concreting
Chemicals were tested for their ability to promote strength gain in portland cement concrete at low temperature. The admixtures depressed the freezing point of the mix water and accelerated...
High-Performance Concrete in All-Weather Deck Pours
A high-performance concrete mix enhanced with a combination of microsilica, superplasticizer, and high dosages of an corrosion-inhibiting, accelerating admixture (calcium nitrite); proved...
Preliminary Results of Direct Tension Tests on First-Year Sea Ice Samples
We present the initial results of our tests to determine the tensile behavior of columnar sea ice over a range of temperatures extending from -20 to -3?C and strain rates of 10-5...
White Steel for Osaka Bay
Wind, earthquake and aesthetics were the design determinations for Japan's Higashi-Kobe Bridge. The designers also had to consider the man-made bay infill site and a directive...
Tomorrow's Toll Road
Techniques using automatic vehicle identification (AVI) currently provide the most efficient form of electronic toll collection. Several systems have been installed in the U.S. in the...
Anchoring?A New Generation
During the time period of NRC Bulletin 79-02, and certainly afterwards, the use and application of wedge type anchors in Nuclear Power Plants took on a new perspective. The data gathered...
Interim Spent-Fuel Storage Options at Commercial Nuclear Power Plants
Although spent fuel can be stored safely in waterfilled pools at reactor sites, some utilities may not possess sufficient space for life-of-plant storage capability. In-pool storage capability...
Fly Ash Grouts for Subsidence Control
A laboratory investigation was undertaken to examine procedures for evaluating candidate grouts and to develop quality grouts for use in abandoned mines. The objective of this grout application...
Properties and Environmental Impact of Stabilized Fly Ash
This paper summarizes the results of two research studies aimed at evaluating the properties and possible environmental effects of bituminous and lignite coal based fly ashes stabilized...
Hydro Rehabilitation?Innovative Solutions
Most hydro facilities have been in operation for many years and, consequently, must periodically have been rehabilitated. The high cost of energy, labor, materials, and financing dictate...
Fly Ash in Roller Compacted Concrete Pavement
This paper presents the state of practice on the use of fly ash in roller compacted concrete (RCC) pavements. Placed using asphalt pavers and compacted using asphalt rollers, RCC pavement...
Superplasticized High-Volume Fly Ash Structural Concrete
This research was carried out to develop structural grade concrete containing high-volumes of ASTM Class C fly ash. A Portland cement concrete, proportioned to have 28-day compressive...
A Computerized Completion
The original designers of the 1.6 million sq ft Fillmore Center in San Francisco (its largest mixed-use development project in 20 years) had specified a large amount of steel reinforcement...
Estimating Geochemical Behavior of Cocnretes to be Placed at Yucca Mountain
The interactions of J-13 water with cementitious materials were examined at 25?C using the geochemical code EQ3NR/EQ6. Results of the modeling suggested the following conclusions: (1)...
Computer-Based Interactive Design for Prestressed Concrete Structures
Prestressed concrete structures can provide a highly desirable solution for many structural applications because the designer gains control over several additional parameters as compared...
Prestressed Concrete Bridge Design and Optimization
The computer program described here analyzes simple span highway bridges for any AASHTO live load, generates girder and slab dead loads, performs the analyses for maximum moments and shears,...
Optimal Design of Reinforced Concrete Structures via Decomposition and a Variety of Search Strategies
This paper presents a strategy where the design of a reinforced concrete structure is not only automated, but optimized. The strategy employs decomposition to subdivide the problem into...
Optimization of RC Frames with Reliability Concepts
Analysis and design optimization are considered simultaneously for reinforced concrete frames. Global displacements were considered as design variables. The nonlinear behavior of the elements...
Return to search