Tunnel Talk
Much talk in tunnel circles has centered on various methods of tunneling, especially the new Austrian tunneling method, or NATM. To be a true tunneling method it must provide a description...

Building Onto History
In a single design/build/renovation project, an Oklahoma City AE firm acquired new offices, provided new life for an abandoned historic church building and spearheaded redevelopment of...

Bells Under Bells
Chicago's newest office tower is supported on new bells that had to be constructed below existing belled caissons. Existing caisson foundations from a previous structure on...

Beam-Supported Slabs Subject to Edge Loading
A model is presented which allows a designer to estimate stiffnesses required to provide a given critical buckling load in beam-supported slabs subjected to biaxial edge loading, such...

Downramping to Minimize Stranding of Salmonid Fry
The objective of this study was to develop a downramping regime for the Jackson Hydroelectric Project on the Sultan River in Washington that minimizes the stranding of juvenile salmon...

A Juvenile Fish Bypass Program at Columbia River Basin Projects
Hydroelectric development in the Pacific Northwest region has altered the natural flow of the Columbia River and its major tributary, the Snake River. This has proven to be detrimental...

Isabella Project?Retrofit of Existing Tunnel
This paper explains conceptual methods of reinforcing and lining the section of the existing tunnel downstream of the three control gates to the exit portal and bifurcation for the power...

Bath County Tunnel System/Remedial Treatment Program
The Bath County Pumped Storage Project, owned jointly by Virginia Electric and Power Company and Allegheny Generating Company, is located 70 miles (112 km) north of Roanoke, Virginia....

Subsurface Savings
Less conservatism than usual in designing building foundations is being accepted or demanded by some owners to save money. The article describes four examples of cost-cutting innovations,...

Probabilistic Prediction of Pile Group Capacity
A reliability analysis of a group of free standing piles in clay is carried out using Monte Carlo simulation. The pile material strength, soil capacity, and the load on the pile group...

Dependence of Fatigue Damage on Loading Amplitude Variability
Welded steel specimens have been tested under variable amplitude loadings to determine the extent to which fatigue life is affected by the rate of amplitude variability of the loading...

Probabilistic Fatigue Crack Growth Analysis with Reliability Updating
A randomized fatigue crack growth model based on the Paris and Erdogan crack growth equation is used to estimate the reliability of fatigue sensitive details in steel bridges. This model...

Fracture Control for Arctic Vessels and Structures
Materials used for construction of Arctic structures and vessels are exposed to low ambient temperatures, high local ice loads and intermediate to high loading rates. All these factors...

Bridge Reliability Evaluation Using 3-D Analysis and Damage Scenarios
This paper reports analytical investigations into the system strength and reliability evaluation of existing bridges using 3-D inelastic analysis and damage scenarios. In this context,...

Damage Accumulation Models for Bridges
In the study summarized in this paper the serviceability and ultimate limit states were reviewed for concrete and steel girder bridges. A model is proposed to evaluate strength and remaining...

Actual Versus Assumed Behaviour of Girder Bridges
It is generally believed that the discrepancies between calculated and actual responses of bridges can diminish, to the point of being nonexistent, with refinement in the method of analysis....

Reliability Methods for Steel Members Subjected to Axial Load and Moment
There has been a significant amount of research performed on determining the reliability of elastic-plastic frames where failure is through the formation of a plastic collapse mechanism....

Resolving Reliability Issues for an Offshore Platform Code
A fixed steel offshore platform design specification based on reliability concepts has been developed which could become an alternate to the existing working stress code, American Petroleum...

Steel Pipe Foundations for Deep Water
Four innovations are helping to make steel pipe piles more popular for foundations in deep water in Southeast Asia. Until recently steel was usually rejected for these applications, because...

High Strength High Rise
For the sixth time in history, a structure billed as the world's tallest concrete building (over 950 ft) is under construction in Chicago. The contractors describe the structure...

 

 

 

 

Return to search