Batter Piles and the Seismic Performance of Pile-Supported Wharves
This paper discusses the role of batter piles in the seismic performance of wharves, based on the results of a nonlinear soil-structure interaction analysis of a pile-supported wharf with...
Pile Driving: Can it Cause Slope Movement?
The potential for slope movement from pile driving is examined in this paper. Published information is reviewed to identify the primary causes of movement, which are 1) displacement of...
Riprap Design in Marine Terminals
Navigation vessels in otherwise quiescent waterways sometimes generate forces that require stabilization of the bed or banks. Since riprap is an accepted and dependable means to armor...
Measured Fill Performance at Berths 212-215 in the Port of Los Angeles
This paper summarizes the performance of an instrumentation fill constructed in open water in the Port of Los Angeles (Port). A new container-handling facility was constructed that consisted...
Non-Intrusive Rayleigh Wave Measurement System for Soil Profiling in Ports
Accurate shear wave velocity profiles have been long recognized as essential data to evaluate the dynamic response of soil deposits and soil-structure interaction under earthquake and...
Earthquake Damage Repair and Retrofit of the Seventh St. Terminal Port of Oakland
The October 17, 1989 earthquake resulted in the collapse of the two-level Cypress St. Freeway in Oakland. Television and newspaper coverage revealed the tragic loss of life and property...
Dredging Contaminated Sediments: A Monitoring Plan for Boston Harbor
Dredging and blasting will be conducted in Boston's Inner Harbor over approximately a one-year period during construction of the Third Harbor Tunnel. The silty organic surface sediments...
Analysis of Dredged Material Deposition Patterns
Between November 1, 1989 and 30 March, 1990, nearly 1 million cubic yards of dredged material were disposed in Puget Sound as the first phase (Element I) of the construction of the Navy's...
Multiuser Sites for Contaminated Sediment Disposal
The Washington Department of Ecology (WDOE) recently adopted a program to identify, rank, and clean up contaminated sediment sites in Puget Sound. Site cleanup, in conjunction with dredging...
Modeling Variable Width Buffer Zones with a Geographic Information System
It is possible to gain significant protection of water resources from nonpoint pollution with buffer strips, but frequently a single width strip is not appropriate. Geographic information...
Engineering Aspects of Wetland Design
Successful wetland enhancement, restoration, or creation projects require integration of desired wetland functions, local hydrologic and soil conditions, and biological requirements into...
Trickle Channel Rehabilitation
Perhaps the primary factor driving the need for trickle channels is urban development. Rural streams in the region display a hydraulic stability and vegetative cover that is resilient...
Fingerprint Identification of Groundwater Petroleum Contamination Using Synchronous Scanning Fluorescence
Synchronous scanning fluorescence spectroscopy, SSF, is a simple, cost effective method for the fingerprint analysis of many petroleum contaminates in groundwater and soil samples. The...
The Challenge of Kissimmee River Restoration
Between 1962 and 1971, the Kissimmee River in central Florida was channelized by the Corps of Engineers as part of a flood control project. Channelization has resulted in degradation of...
Delaware Estuary Nonpoint Source Control Program
Preparation of the Delaware Estuary Management Plan, sponsored by the EPA and the three states of New Jersey, Pennsylvania and Delaware, is part of the national estuaries program. As part...
Reuse Rules
Cities that discharge sewage effluent to surface water are under increasing pressure to reduce concentrations of heavy metals, ammonium and nitrate, and substances such as toxic organic...
Evaluation of Fine Aggregate Particle Shape and Texture
In an effort to minimize or eliminate permanent deformation (rutting) of heavy duty asphalt pavements most governing agencies now limit the amount of natural sand which generally (not...
Realistic Specifications for Manufactured Sand
Data which demonstrate the beneficial effect of using fine aggregate having high fines contents on concrete properties are presented. All data indicate that the use of a high fines content...
Investigation of the Behavior of Reinforced Plastic Columns with Concrete Core
This paper describes an experimental investigation into the behavior of reinforced plastic columns with tubular (hollow) sections. The columns were pultruded and had a cross-section which...
Stability and Performance of Slopes and Embankments II
This proceedings,
Return to search