The Generalized Brazier Problem for Orthotropic Straight Tubes of Finite Length
A new engineering approach, based upon a mixed variational functional, is presented for the analysis of the nonlinear static behavior of thin-walled, circular-cross-section cylindrical...
Crushing Response of Energy Absorbing Composite Structure
A description of why and how composite structures crush and absorb energy is presented. The three primary crushing modes of composite structure (transverse shearing, lamina bending and...
Eigenproperties of a Twisted, Nonuniform Rotating Beam by the Finite Element Method
A initially twisted blade with nonuniform properties along the length, is rotating with constant angular velocity about an axis perpendicular to it's elastic axis. The blade is modeled...
Modal Analysis of Vibration Response for Condition Monitoring of Structures
The response of a structure to load is evidence of what the structure is; of the materials, members, connections and form of the structure. Response is evidence as well of the condition...
Evaluating Damage Detection in Bridges
Several researchers have recently considered using vibration monitoring of highway bridges as a means for detecting structural deterioration. Results to date have demonstrated that the...
A New NDT Device for Comprehensive Pavement Maintenance (Theoretical Aspects)
A new nondestructive testing (NDT) device is being developed to detect some precursors to pavement distress. The principle of operation of the device is based upon the generation and detection...
Integrity Testing of Concrete Elements Using Surface Waves
The Spectral Analysis of Surface Waves (SASW) method is a nondestructive testing procedure which has been extensively used to determine in situ the elastic moduli of soils and pavements...
Flow Dynamics in an End-to-End Vascular Graft Junction
A study consisting of both experimental and numerical methods was performed to determine flow dynamics in the vicinity of an end-to-end anastomosis. The experimentally determined geometries...
A Multiple Disk Centrifugal Pump as an Artifical Ventricle
A pulsatile, multiple disk, centrifugal pump has been analysed and tested for potential use as an artificial ventricle. The pump is similar to a Tesla Turbine design which consists of...
Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...
Constitutive Modeling of Slurry Infiltrated Fiber Concrete (SIFCON)
Slurry Infiltrated Fiber CONcrete (SIFCON) is a unique material, containing 5 to 18 percent, by volume, of steel fibers; in contrast, standard Fiber Reinforced Concrete (FRC) usually contains...
Modeling Bond Stress-Slip of Reinforcing Bars Embedded in SIFCON
A brief description is given of the mechanisms associated with the bond shear stress versus slip response of deformed reinforcing bars embedded in slurry infiltrated fiber concrete (SIFCON)....
Optimization of Discontinuous Fiber Composites
Discontinuous Random Fiber Reinforced Composites (DRFRC) exhibit different behaviors depending on their microstructural properties. Small fraction of fiber rupture can have a beneficial...
Determination of Interfacial Shear and Normal Stresses in Fiber Pull-Out
In this paper we present an improved formulation for the pullout problem, wherein both the effects of fiber end condition and interfacial and frictional shear stresses are considered....
Failure Prediction of Anisotropic Material
Basic mathematical elements of a higher order failure theory for anisotropic material are outlined. Surface closure is ensured by requiring a tensor polynomial to satisfy constraint conditions....
Modeling the Chaotic Behavior in Simple Shear Granular Flows
Simple shear granular flows have demonstrated a variety of puzzling phenomena. Both computer simulations and physical experiments have discovered particle grouping, layering and shear...
Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....
Laboratory Testing of Mechanical Rock Bolts
An analytical solution to a boundary value problem of a clamped cylindrical panel with anti-symmetric angle-ply laminations subjected to transverse loads is presented. Sanders' kinematic...
Structural Characterization of an Articulated-Truss Joint
A first generation space crane articulated-truss joint was statically and dynamically characterized in a configuration which approximated an operational environment. The articulated-truss...
Experimental Study of Underground Exploration by Auger Boring on a Mars Rover
A system study was conducted on the possibility of exploring Mars using a Mars Rover, and particular efforts were focused on the underground exploration of Mars by an auger boring machine....
Return to search