ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Compressive Strength and Characterization of Failure Modes for Polymer Concrete
The effect of aggregate type, polymer content and specimen dimensions on the compressive strength and failure modes of a polyester polymer concrete (PC) was investigated. Two aggregate...

Constitutive Modeling of Slurry Infiltrated Fiber Concrete (SIFCON)
Slurry Infiltrated Fiber CONcrete (SIFCON) is a unique material, containing 5 to 18 percent, by volume, of steel fibers; in contrast, standard Fiber Reinforced Concrete (FRC) usually contains...

Optimization of Discontinuous Fiber Composites
Discontinuous Random Fiber Reinforced Composites (DRFRC) exhibit different behaviors depending on their microstructural properties. Small fraction of fiber rupture can have a beneficial...

Determination of Interfacial Shear and Normal Stresses in Fiber Pull-Out
In this paper we present an improved formulation for the pullout problem, wherein both the effects of fiber end condition and interfacial and frictional shear stresses are considered....

Microcrack Interaction Toughening in Ceramics and CMCs
The generation of microcracks, which causes an extension of the damage zone at values of stress intensity factor, K, below the expected critical level represented by K_IC...

Pattern Formation and Time-Dependence in Flowing Sand
The authors present results for a number of experiments on flowing granular materials and a novel cellular automata model for the flow of these materials when the grains are long and thin....

Stability of Beams in Eccentrically Braced Frames
As the link yields and strain hardens in an eccentrically braced frame, the beam segment-outside of the link is subject to a combination of high axial force and bending moment. For certain...

Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....

Laboratory Testing of Mechanical Rock Bolts
An analytical solution to a boundary value problem of a clamped cylindrical panel with anti-symmetric angle-ply laminations subjected to transverse loads is presented. Sanders' kinematic...

Cylindrical Fabric-Confined Soil Structures
Using the local soil as a structural material can greatly reduce the transport requirements for constructing Lunar and Martian surface structures. A fabric-soil structural concept which...

Tensile-Integrity Structural Concepts for the Lunar Surface
This paper suggests the use of tension cable structures of a particular type, Tensegrity structures, for a lunar base. Tensegric shells can be a system of bars and cable net. The shell...

The Small Mars Rover
Mars rover is one of the principal technical means intended for studying the surface of Mars. The first Mars rover was delivered to the Mars surface in 1971 and was designed for studying...

Experimental Study of Underground Exploration by Auger Boring on a Mars Rover
A system study was conducted on the possibility of exploring Mars using a Mars Rover, and particular efforts were focused on the underground exploration of Mars by an auger boring machine....

Indigenous Planetary Construction Material Through Soil Modification
This paper will discuss the theory of soil modification and its potentials for producing planetary construction materials. The authors will also present the results of prelimnary experriments...

Mechanical Properties of Lunar Soil and Simulants
Investigation of the physical and mechanical properties of lunar soil carried out by the USSR and the USA; both in situ and on returned samples, has resulted in considerable information...

Structural Materials from Lunar Simulants Through Thermal Liquefaction
Thermal liquefaction that allows development of intermediate ceramic composites from a lunar simulant with various admixtures is used to develop structural materials for construction on...

In-situ Release of Solar Wind Gases from Lunar Soil
A concept is described which has the potential to perform the in-situ heating of the lunar regolith in order to release the solar wind gases. The poor thermal conductivity of the lunar...

Hydrogen Reduction of Lunar Soil and Simulants
Carbotek, Inc., and the Energy and Environmental Research Center (EERC) are cooperating on further development of the Carbotek process to produce oxygen from lunar ilmenite by hydrogen...

Lunar Oxygen ? The Reduction of Glass by Hydrogen
The direct reduction of volcanic glass by hydrogen has been proposed as a method of extracting oxygen from the lunar soil. Experiments using lunar simulant glasses reacted with flowing...

A Modified Sulfate Process to Lunar Oxygen
A modified sulfate process which produces oxygen from iron oxide-bearing minerals in lunar soil is under development. Reaction rates of ilmenite in varying strength sulfuric acid have...

 

 

 

 

Return to search