ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Material Testing at High Pressure
A static test cell has been designed and fabricated to apply a peak stress of up to 2 GPa to a 2.54 cm cylindrical specimen. The cell design was based on the 'belt'...

Strain Rate Effects on Pressuremeter Testing
This paper discusses the effect of strain rate on the cavity expansion problem and pressuremeter test. A cuboidal shear device, CSD, was used to perform pressuremeter strain path tests...

A Micromechanics Model for Rough Interfaces
A new constitutive model for transfer of interfacial tractions along rough cracks in strain softening composites is presented. The model relates the normal and shearing stresses on the...

Microscopic Modeling of Shear Strength of Contaminated Soils
The degradation of shear strength of soils due to prolonged contamination of soils is an emerging problem. The experiments conducted at New Jersey institute of Technology showed a gradual...

Geometry of Yield Surfaces for Frictional Flow of Granular Materials
In the frictional flow regime, the discrete particles which compose of granular material roll or slide over one another, maintaining essentially continuous contact. Many theorists, including...

Numerical Experiments for Anisotropic Behavior of Granular Materials
A three dimensional discrete element computer code 'TRUBAL' is used to investigate the effect of initial anisotropy on stress-strain and volume change characteristics...

Instability in Granular Chute Flows
Numerical simulations showed that granular flows in a vertical chute can flow as a steady, uniform stream or as an intermittent slug flow. In numerical experiments slugs or grouping of...

Microstructure and Stress Differences in Shearing Flows
Steady shearing flows of highly inelastic particles are simulated using rigid and slightly deformable sphere models. Large first normal stress differences in small systems are observed,...

Computer Simulations of Rapid Granular Flows Interacting with a Flat, Frictional Boundary
This paper compares the results of numerical simulations for the rapid, steady flow of identical spheres colliding with a flat frictional boundary with the recent predictions of Jenkins...

Simulations of Gravity-Driven Channel Flows of Disks Floating on the Flowing Viscous Fluid
A two-dimensional discrete element model has been applied to the problem of gravity-driven channel flow of uniform disks. The particles are floating on the surface of the flowing fluid...

Simulation of the Quasi-Static Deformation of 2D Assemblages of Rigid Discs
Although the importance of dilatancy in the constitutive behaviour of granular materials has been recognized for some time, conclusions about its evolution and dependence on different...

Interparticle Sliding and Rolling
Numerical experiments are done with a continuum plasticity program in order to study the initiation and evolution of shear bands. Many elements are used in order to resolve families of...

Flows of Hazardous Materials Through States by Rail
This paper presents information on the tonnages of hazardous materials passing through each of the contiguous 48 states (and the District of Columbia) by rail. The quantities are estimated...

An Expert System for Estimating Soil Strength Parameters
An expert system to aid in selecting shear-strength parameters for use in stability analysis was developed for use on a PC. It provides guidance in interpreting strength measurements and...

Monte Carlo Simulations of the Dynamic Response of Pile Groups
A study is presented on the effect of variations of relevant parameters within a pile group on the vertical dynamic response of the group. These parameters include the shear wave velocity...

Data Base of Seismic Body Wave Velocities and Geotechnical Properties
A data base of seismic velocities measured in soils and standard geotechnical engineering material properties has been established at the U.S. Army Engineer Waterways Experiment Station...

Hugo 1989 - The Performance of Structures in the Wind
The performance of buildings in the Carolinas during Hurricane Hugo, 21-22 September 1989, is reviewed. Wind speeds in most locations were below the design levels specified in the local...

Measurements of Nutrient and Metal Fluxes from the Sea Floor in the Area Around the Whites Point Sewage Outfall, Los Angeles, California
Studies are underway to determine the influence of sewage outfall-impacted sediment on the exchange of nutrients and trace metals in the coastal marine environment. Utilizing a benthic...

Development of Long Beach Downtown Marina
This paper describes the planning and construction of the new Alamitos Bay Marina just offshore of Long Beach's downtown shoreline. From an engineering standpoint the construction...

Hydrodynamic Behavior of Cohesive Sediments in Turbulent Flow
To meet both engineering and basic research requirements, a series of experiments on the deposition of cohesive soil were conducted in an annular rotating fiberglass channel-ring system...

 

 

 

 

Return to search