Normal and Tangential Contact of Layered Spheres as Models of Joint Contact
The causes of cracking in degenerating cartilage are examined using analytical models of layered elastic spheres in normal and tangential contact. Vertical surface and deep radial cracks...
A Contact Problem Modeling the Squeeze-Film Mode of Synovial Joint Lubrication
A contact problem modeling synovial joint lubrication under squeeze-film conditions is studied. In this model, the thin synovial fluid layer is incompressible and linearly viscous, and...
A Two-Dimensional Model of Airbag Deployment
An interactive program was developed to simulate the unfolding and deploying process of a driver side airbag in the sagittal plane. The airbag was represented by a series of nodes. We...
Modelling of Tubes with Large Plastic Deformation
A thin circular tube laterally compressed between two rigid plates is investigated for its load(P)-displacement(?) behaviour. The moving hinge concept yields a good prediction compared...
Buckling Loads of Columns Made of Viscoelastic Materials
This is about the developing of relationships for predicting the change of buckling loads of columns made of viscoelastic materials under different loads. When a columnlike structural...
Dynamic Response Analysis of Three-Dimensional Beam-Columns
This paper describes a methodology for dynamic response analysis of three-dimensional beam-columns, whereby an elastic force's axial-flexural interaction is modeled with stability...
Dynamic Behavior of a Non-Linear Cable Truss
The equations of motion of a geometrically non-linear cable truss are presented. The behavior of the truss subject to harmonic excitation is studied....
Engineering Applications of the Analysis of a Spherical Shell
In a companion paper, a set of two integral equations have been established for a spherical shell under axisymmetric loads. This set of equations may be solved numerically by using Nystrom...
Curvature Effects on the Deflection and Vibration of Cross-Ply Shallow Shells
The use of high performance materials is becoming increasingly significant in structures subjected to severe loading conditions. Effects of curvature on the stiffness characteristics of...
Experimental and Numerical Chaos in Continuous Systems: Two Case Studies
Motivated by recent numerical investigations according to which certain types of deep-water compliant offshore structures may experience undesirable chaotic motions, two types of experimental...
System Identification Techniques for Inelastic Structures
A classical optimization algorithm is used to identify the parameters of a smooth hysteretic restoring force model, which can be used to describe the inelastic behavior of structures under...
Large Deflection of Simply Supported Inplane Loading Rectangular Plate Under Uniform Random Pressure
The procedure for obtaining an approximate solution for the mean-square deflection as well as maximum mean-square stress of geometrically nonlinear rectangular plate with arbitary power...
Elastic Stability of Non-Rectangular Plates
Non-rectangular plates may have infinite number of geometric configurations. Idealized pattern of practical shapes is chosen to be a sample for these plates. The present paper is concerned...
Poisson Instability of Laminated Composite Plates
The paper considers the uniaxial buckling of rectangular, anisotropic composite laminates with in-plane restrained unloaded edges where Poisson's effect is predominant to...
Finite Element Stability of Eccentrically Stiffened Plates
A finite element model is developed to investigate the elastic stability of eccentrically stiffened rectangular plates. The formulation is based on the behavior of the plate-stiffener...
Buckling of Frames with Load-Dependent Supports
The supports of frames may increase their rotational resistance as they are compressed. It is assumed here that this stiffening is a linear function of the load. Sway and nonsway buckling...
Ultimate Loads of Steel Frames with Imperfections
As for real structures, initial geometric imperfections are inevitable and may have a destabilizing effect on the structures. The present research deals with the study of this imperfections...
Frictionless Contact of Composite Laminates
An approximate solution technique for determination of contact stress distribution under a curved, rigid punch indenting an arbitrary laminated composite plate is outlined. The individual...
Elastic Stability of a Laminated Column
Buckling load of an unsymmetric, laminated column is obtained through the use of imperfection method. The condition requiring to have non-vanishing bending moment at the ends of a pinned-pinned...
Failure Characterization of Structural FRP Bars
A combined experimental and theoretical investigation on the structural behavior of fiber reinforced plastic (FRP) bars is presented. Test results indicate that the ultimate strength decreases...
Return to search